answersLogoWhite

0


Best Answer

Anyone that is forced to get a repair to any part of their car may be stuck with large mechanic bills. Any plastic bumper will stand up to scratches, but not always dents. If there is a crack in the bumper, you may even need to get a paint job done. Most home improvement or hardware stores carry anything you would need to fix the crack and paint your car.

The first thing you must do is scuff the part of the bumper that was damaged. You can use a sandpaper that is 80-grit. You simply rub it from one side of the bumper to the other. This will allow the paint to adhere better to the surface of the bumper. You should now put on a pair of plastic gloves. Then, pour a little bit of prep plastic solvent onto a rag and clean the sanded area. It should only be wiped in one direction, keeping it from just moving dirt back and forth. It must be done this way to actually clean the bumper.

Then, you should mix an equal amount of hardener and repair adhesive onto a piece of cardboard. You should wear your gloves to measure around three tablespoons of each. You can spread this new mixture onto the crack of the bumper with a squeegee. You need to give it about twenty minutes to dry. You need to have a new squeegee so you can put on plastic filler. You should put on a light coat of the filler over the crack. The more filler you put onto it, the more you will have to sand away later.

You can use more of the sandpaper to smooth the plastic filler away. The plastic filler must be completely dry to sand, otherwise it will spread and cause problems. You can now pour your choice of paint into a paint sprayer, following the instructions from the manufacturer. The region of the bumper that was fixed should get between two and three coats of paint, or until it matches the rest of your car. When this is finished, you just let your car dry for one full night.

User Avatar

Wiki User

13y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How to Repair a Plastic Bumper?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How do you repair a scraped plastic bumper?

melt the plastic back. use a lighter,,,


How does one repair a broken bumper?

In order to repair a broken bumber, you should apply an adhesive to the plastic and let it sit. Then use a plastic welder to mold the plastic back together. If it is just a dent in the bumper, you can use heat and hammer to press the pop back out.


Are there any auto mechanics who can repair my bumper?

If you are wondering if there are any auto mechanics who can repair your bumper because your bumper is broken, then the answer is yes. There auto mechanics that can repair your bumper.


How can I repair the plastic molding on the bumper of my Dodge Durango?

It depends on how badly the molding is damaged as to if it can be repaired. Usually the molding would have to be replaced.


What do you use to attach plastic bumper to bumper?

Super glue


Can you repair a plastic bumper?

If they have been damaged by taking a hit, resulting in distortion or tearing ,no. Scratches can be filled with a 2 part plastic filler available at auto shops. Car body filler will not stick .


How do you repair a completely split lower front plastic bumper on a Subaru Impreza?

I understand that some places use hot pressurized air to weld plastic. YOu may want to research plastic welding. However, because there is such a large market for used parts; it may be cheaper to get one off of a wreck rather than repair.


Whcih auto body place does bumper repairs in the Syracuse, NY area?

There are two main bumper repair companies in Syracuse. Sandy's Bumper Mart and Mobile Paintless Dent Repair both specialize in bumper repairs in your area.


How to Learn All About Bumper Repair?

Bumper repair is the most common form of automobile repair performed in the United States. Front and rear bumper damage is very common because people tend to back up and hit things. The front bumper is more expensive to replace than the rear bumper, because the front bumper usually has more attachments and protective features to protect the car’s engine.Bumper repair is not cheap, especially if the front bumper has been hit hard and damaged severely. Depending on the car bumper, repair can cost anywhere from $500-$2000 and require days of work by the mechanic. Bumper repair is the most common form of automobile repair done in the United States and Europe. If you are looking to save money bumper repair can be avoided by simply replacing the entire front bumper and buying a stock part from the car manufacturer.Unfortunately, this method of saving money can take much more time than simply having the front bumper repair. You will have to wait on the car manufacturer to send the entire part to you, and then you will have to paint the bumper or get it painted by a professional. It is recommended that you get the bumper painted by a professional so it matches the color of the rest of the car. This method of bumper repair will save you money, but it will take double the amount of time to fix.Do not try to drive your car without the bumper. Driving without bumper is extremely dangerous because it exposes the engine to debris that may fly into it, or if you get into an automobile accident without a bumper, you are going to experience much more damage to the rest of the car because the bumpers absorb shock.Bumper repair services can be found in the internet by doing a simple search. Doing a search on the internet for bumper repair will also bring up the various mechanics in your local area, so if you are searching for a professional bumper repair man, a good way to find one is to search the internet. Bumper repair is not cheap, so drive safely, and avoid getting into a collision with another car or an object.


Can you interchanger a bumper from a 1989 325is to a 1987 BMW 325e 2dr?

that depends. does your 325e have a aluminum bumper or a plastic bumper? if it has the aluminum bumper, you should order new bumper shocks for an post face-lift 87 model. post 8/87. the reason? the shocks that fit aluminum bumpers are very long, and if u attach a plastic bumper, it will stick out too far. if the 325e has a plastic bumper, then everything will be as easy as detaching and re-attaching your bumper.


How do you repair front bumper 2005 Chevy silverado?

do i have to buy the brackets wit the bumper when i buy it


What material is a car bumper?

probably plastic