0
Ice makers have a large amount of pressure on them, so if there is a problem with this line, it needs to be fixed immediately. If not, you may go through a lot of water damage in your kitchen. You may need to hire a professional to fix it, but it is possible to do it on your own. It might be a good idea to get a friend to help you move the refrigerator away from the wall.
So, the first thing that you need to do is move the fridge. Every fridge should have a fairly large loop behind it that is made of copper tubing. This will make sure you have room to move it. You need to also check that you are not scraping the flooring as you slide it away from the wall. You should feel around the connection lines for wetness. There may also be bubbles of water coming out a the pipe. This could happen on the refrigerator connection or on the pipe for the cold water. You also need to check that the fridge has the right amount of water pressure, and no bends in the lines.
You should make sure that the valves that allow the water into the fridge are set to open. They may need to be replaced, in which case you can get one that needs a hole drilled, instead of one that has a self-piercing tap. You should write out the model number for your refrigerator, just in case you need to replace a pipe or valve. You just measure the length of the tubing and go to a hardware or home improvement center. You can buy a tubing kit for your ice maker, which should be copper.
The water line should be turned off, along with the pipe that you are going to connect to. Drain out each pipe, so you can start with the kit directions. The line will need to be reconnected, and the water turned back on. Again, you need to check for leaks. If the ice maker still does not work, you should call in a certified professional that deals with refrigerators.
Wiki User
∙ 11y ago
Wiki User
∙ 11y agoYou can find information on how to repair an ice maker in the manual that came with the ice maker. You could also ask a mechanic that knows how to repair ice makers.
Add your answer:
Earn +20 pts
repair ice maker?
repair ice maker
How do you repair an ice maker on an Amana refrigerator if it is not receiving water after it passes through pipe in the back?
Check the water solenoid valves. On our Kenmore the valves had begun to stick causing the ice maker to fail as it is a timed cycle to fill the tray.
do it yourself repair for an ice maker?
do it yourself repair for an ice maker
how to repair kenmore ice maker?
how to repair kenmore ice maker
Maytag side by side has a new ice maker and a new water pump but the water is not getting to the ice maker what should you check next?
The water pipe from the pump to the ice maker is quite thin; check it to see that it is not plugged. Check to see that there is water also at the inlet to the water pump. If there is not, check that the pipe leading to the water pump is not plugged.
Ice maker Refrigerator Repair?
Most refrigerators in use today have ice makers that may stop working from time to time. The refrigerator’s ice maker receives its water supply from a water valve. The water valve is the first component of the refrigerator that should be checked when there is a malfunction with the ice maker. To operate, the ice maker closes an electric circuit enabling the water valve to open. Water will then flow through the water valve into the ice maker. The ice maker will then begin the process of making ice cubes and placing them in the ice tray. The water valve has a filter that keeps out particles from entering into the ice maker through the water supply. These particles can sometimes build up at the water valve filter and may even block the flow of water to the ice maker. When the flow of water in the water valve is restricted due to build up, it can cause the still water freeze in the valve. One solution is to heat the water valve with a hair dryer to melt the ice buildup in the ice maker. Be careful not to heat the plastic of the refrigerator too much causing it to melt. These particles can also lock the valve in the open position filling up the ice maker to excess. Sometimes an open solenoid coil winding can cause the valve to remain closed. This will not allow the water to flow to the ice maker as the plunger remains closed. In order to do further tests on the refrigerator to determine the fault with the ice maker is to test the current flow. This will not only be a safer measure for you as you attempt to repair your ice maker, but will also ensure the various components are operating as they should. Your diagnosis will most likely be related to the water valve, but if your refrigerator is old it could mean your ice maker needs to be replaced. Occasionally the electrical connections can sometimes get short circuited or disconnected during use. Thoroughly examine all the parts of your refrigerator with the proper tools and testing equipment.
What would cause a refrigerator ice maker to overflow and run water into the ice cube tray?
DIRTY ICE MAKER WATER VALVE OR BROKEN VALVE
Does this have an ice maker?
This unit has a water dispenser on the front but not one for ice.
What does a water inlet valve on Ice maker do?
Opens and closes an internal valve to provide/cut-off water to the icemaker - responds to pressure signal from the ice-maker to deliver/cutoff water - ice-maker signal activates an electric solenoid that open/closes the valve for water flow.
What would cause a Kenmore ice maker to stop getting water when the water in the door works fine and gets water?
The water line where it enters the ice maker could possibly be frozen.
Where can you find a KitchenAid Repair manual for refrigerator Model KSRG22FKBT05?
need model of ice maker.
Can I repair my ice maker, or do I need to call a service technician?
It is possibly to repair your ice maker. Be careful of unattaching any hoses and check for hairline cracks in the hardware. Worst case scenario you have to call the technician afterward, but it doesn't hurt to try to fix it yourself first.
