0
What else can I help you with?
Where can I find the closest used CNC turning center?
There are several websites that give information about CNC turning centers. A search engine can also be used to find the nearest CNC turning center.
When do you know you need a new engine?
When you bring your car to a several mechanics and they keep saying buy a new engine because your cylinders are no good and eventually your engine will stop working by not turning on.
What happens if i put detergent in the gas tank?
You will ruin the engine and have to spend several thousand for a new one.
What happens to a van that has a broken crankshaft?
depends, could need a whole new engine block. if it still cranks over some pistons won't be turning.
Is there supposed to be a spark at the plugs when you turn the ignition on but not turning the engine over?
No. It should only spark with the engine turning over.
Engine oil pump in use when?
The oil pump is driven by the distributor shaft, so it's turning whenever the engine is turning.
Why would a car with half a tank of gas with a new fuel pump stall while turning left and not while turning right?
Engine stalling may be caused by several factors, such as incorrect idling speed and errors in the engine sensors. But for that symptom, it would not hurt to check a stuck braking system first.
What happens when your car battery light comes on and the thermostat hand goes up?
A very good chance the fan ( alternator ) drive belt has broken Depending on what engine is in your vehicle, the water pump has probably stopped turning which will increase the temperature of the engine. Also the alternator will have stopped turning, illuminating the no charge warning light.
Why does car shake when turning off the engine?
A car may shake when turning off the engine due to several reasons, including engine vibrations, uneven wear in engine mounts, or a faulty fuel or ignition system. When the engine stops suddenly, these vibrations can become more pronounced, leading to a noticeable shake. Additionally, issues with the exhaust system or a misfiring engine can also contribute to this phenomenon. If the shaking is severe or persistent, it’s advisable to have the vehicle inspected by a mechanic.
Why is engine not turning over?
Ck battery
The difference between turning and cranking an engine?
generally , cranking an engine is done with igniton where turning is done by hand with the ignition off so as it will not start
Why Car engine stalls when turning?
If a car engine stalls when turning, there could be a problem with the power steering pump. There could also be an issue with an emissions control device.
