There are two screws behind rubber caps on pull strap. There is one screw hidden behind plastic piece that pulls out behind the interior door handle. There is one screw to the left of reflector, and one on the bottom of the panel. Pull plastic window/lock button panel up and out (be gentle). Disconnect molex connectors (plastic wire connectors. Pull panel up and out. Replacing window motor is quite difficult and in my opinion it is better to pay someone $50 to fix it than to do it yourself.
I would remove the door panel and have a look at what's going on in there the window has obviously popped out of the guide.
Remove the inside door panel of your 1997 Mercury Cougar. Remove the wiring harness from the window motor. Remove the window motor linkage. Remove the window motor retaining bolts. Reverse the process to install the new window motor.
Remove the inside door panel of your 1999 Mercury cougar. The entire window mechanism will be visible. Remove the wiring harness from the window motor. Remove the window motor linkage. Remove the window motor retaining bolts. Reverse the process to install your new window motor.
Begin by removing the inside door panel of your 2001 Mercury Villager. Remove the window motor wiring harness. Remove the window motor linkage. Remove the window motor retaining bolts. Reverse the process to install your new window motor.
Just use a flat head screw driver to pry it off.
Open driver side door. remove inner door panel lower window pull it out of the bracket.
Remove the door panel of your Mercedes-Benz. Remove the window glass retaining clips. Remove the window glass. Reverse the process to install your new window glass.
remove side pannel on driver side to get to the window on a 2001mustang v6
ow do I access window switch on a 99 mercury willager?
See link below (steps 1-7)... http://www.autoclinix.com/Mercury/Front%20Speakers2.htm
How do you remove and replace the motor for the drivers side power window in a 2000 Sienna
remove door panel, install new window