Just use a flat head screw driver to pry it off.
Begin by removing the inside door panel of your 2001 Mercury Villager. Remove the window motor wiring harness. Remove the window motor linkage. Remove the window motor retaining bolts. Reverse the process to install your new window motor.
If it's the opening type, unscrew the latches and take it off.
If you don't have experience doing this I suggest you take it to a glass shop, or you could do more harm than good.
Turn the key to the right.
On a 2000 Mercury Villager : The washer fluid for the rear liftgate is supplied by the same reservoir as the windshield ( located in the engine compartment )
Replacing a window motor in a 1999 Villager is quite easy. You will need to take the door panel off and unassembled the motor and put in the new motor.
ow do I access window switch on a 99 mercury willager?
Cause the window motor is out
It prevents the power window switches other than the driver's from operating.
It's held on by one screw in the hand hold.
Not all minivan window latches are interchangeable, so it's unlikely that any minivan latch will work for your 1999 Mercury Villager's sliding window. It's best to look for a latch specifically designed for the Villager or compatible models. Consider checking with auto parts stores or online marketplaces for exact matches or compatible replacements. If necessary, visiting a salvage yard may also provide options.
If it is electric it's switch is on the drivers door next to the switches for the front windows