0
What else can I help you with?
Suction line location on 87 Z28?
I assume you are referring to a vacuum line. As there are more than one vacuum hoses, impossible to answer your question.
What is the liquid line and suction line?
The suction line is the big one. This line should be cold when the unit is on. The small line is the liquid line.
How do you tell the suction line in central air conditioning from the high side line?
The suction line will be the larger line going into the compressor.
How should an air conditioner suction line feel to the touch?
A suction line is usually cold to the touch.
Is the suction line the high side?
No, the liquid (discharge) line is the high pressure side. The suction line is the low pressure side.
What side of compressor is suction on 5.9 V8 1996 Dodge?
The larger line is suction. The larger line is the suction side which should be on the right side of the compressor......
Where must a suction-line drier be placed in a heat pump?
In a heat pump system, the suction-line drier should be placed on the suction line, typically between the evaporator and the compressor. This location allows the drier to effectively remove moisture and contaminants from the refrigerant before it enters the compressor, protecting the compressor and ensuring efficient operation. Proper placement is crucial for maintaining system performance and longevity.
Why is the suction line of a pump larger than the discharge line?
It is common practice to specify the pump suction line one size larger than the pump discharge line in order to increase the Net Positive Suction Head available (NPSHA) to the pump. A smaller suction line the same pipe size as the discharge line would result in more pressure drop in the suction line and reduce the amount of head available to the suction side of the pump. This in turn would result in an operating point closer to cavitation of the pump.
What indicates a problem while inspecting a suction line of an air conditioner?
"What" on the suction line of an air conditioner indicates a problem?
Where must a suction line drier be placed in a heat pump t?
In a heat pump system, the suction line drier should be placed on the suction line, typically between the evaporator and the compressor. This positioning helps to remove moisture and contaminants from the refrigerant before it enters the compressor, ensuring optimal performance and preventing damage. It's crucial to install the drier in a location that allows for easy access for maintenance and replacement.
Locate the low presure ac port on 2005 Dodge Durango?
The low side service port is located on the suction line at the top of the engine.....
What is a suction line on an Air Conditioner?
The suction line connects the evaporator outlet and the compressor intlet. Low pressure refrigerator vapour is drawn from the evaporator to the compressor through this line.
