0
There are a lot of variables involved that haven't been explained. However, I'd guess around 300 HP. I'll tell you straight up that you've got way too much carb for that engine. You'll get a lot better throttle response and smoother operation if you downsize to a 650 cfm. For a mild application that is street driven try and stick with a vacuum secondary instead of a double pumper.
What else can I help you with?
Can you change the lifters in your 318 without removing the intake?
No. They intake and heads need removed.
Where are the lifters located on a 454 Chevelle?
under the intake manifold.
How do you determine if a 4.3 liter Chevy has hydraulic lifters?
They all had hydraulic lifters. To determine if it has roller lifters, you'd probably need to take off the intake manifold and have a look.
Does the head have to be removed to replace lifters in a 4.0 liter jeep engine?
i dont think they do, the lifters are right under the intake manifold
How do you remove lifters from A 1998 Chevy 454?
They are under the intake manifold.
How do you replace the hydraulic lifters in a 1973 to 76 Chevy 350 engine?
It's not recommended to change just the lifters. The cam and lifters should be replaced together. To get at the lifters, you can remove the rocker covers and intake manifold, loosen the rockers enough to get the pushrods out, then pull out the lifters.
How do you find the intake and exhaust lifters on a engine?
The exhaust lifters will line up with the exhaust manifolds,Remove the valve cover if your working on a V8 and the valve that lines up with the exhaust port will be the exhaust valve,If it is a Chevy V8 they will be from standing in front of the car exhaust,intake,intake,exhaust,exhaust,intake,intake,exhaust.
Do you need to pull the head on an 86 s-10 with a 2.5 to install new lifters?
No, just pull the intake manifold, thenfish the lifters out.
How do you replace the valve lifters on a cavalier?
To replace the valve lifters on a Cavalier, remove the intake manifold, valve covers and rocker arms. Remove the heads of the lifters using needle-nose pliers.
Can you replace lifters in a 302 Ford engine without removing the intake manifold?
no.
What is the torke on the intake and exhaust lifters?
Depends on what engine you are asking about which you fail to list.
Can the lifters in a 1997 ford ranger 3 liter engine be removed without removing the intake manifold?
no, u need to remove the heads to get at the lifters
