answersLogoWhite

0

The shifting issue in your 1992 Chevy G30 could be due to low Transmission Fluid, a failing transmission control module, or internal transmission problems. The feeling of slipping into neutral when up to speed suggests possible transmission wear or a problem with the torque converter. The ABS brake light could indicate a malfunction in the braking system, potentially related to the wheel speed sensors or the ABS module. It's advisable to have both the transmission and ABS systems inspected by a qualified mechanic.

User Avatar

AnswerBot

2mo ago

What else can I help you with?

Related Questions

Does a 95 dodge ram 1500 have to be started to check the transmission fluid?

The fluid level in an automatic transmission in a 1995 Dodge Truck should be checked at idle in Neutral with the engine at operating temperature.The fluid level in an automatic transmission in a 1995 Dodge Truck should be checked at idle in Neutral with the engine at operating temperature.


What is the main function of the ignition safety switch?

To prevent the engine from being started while the transmission is any gear other than park or neutral.


Automatic transmission just started shifting hard if you get it serviced will it help?

It for sure cannot hurt and may very well help. Have the fluid and filter changed, and see where you stand then.


Why did your automatic transmission pop when you put it in reverse an then the fluid started leaking when you put it in gear?

Low Transmission fluid


What causes a 96 Grand Am SE manual transmission gearstick to be stuck in 5th gear but transmission in neutral car can be started?

car can be started an does run fine.


Where is the neutral safety switch on 1996 Chevy Caprice?

The neutral safety switch on a 1996 Chevy Caprice is located on the side of the transmission. It prevents the vehicle from being started unless the transmission is current set to park or neutral.


What is a starter Ignition Neutral switch?

Neutral switch? If you mean the neutral-safety switch, it's a switch that opens (prevents current from flowing) when your car is not in park or neutral. Without this switch, you would be able to turn the key and actuate the starter when your transmission is in reverse, drive and low range.


Where is the neutral switch on a 1965 Chevy Impala?

The neutral switch on a 1965 Chevy Impala is located under the transmission shifter. It detects when the vehicle is in park or neutral and allows the engine to be started.


Can't get your car in gear?

If it is an automatic transmission, make sure the car is started if it is in Park or Neutral, and press the brake pedal in as far as it can go. If the car is stuck in a gear other than neutral or park, DO NOT START IT. It will damage your engine and your transmission. Call a tow truck. If it is a manual, press in the break pedal and the clutch pedal fully, and try to put it in gear. If it doesn't go, then put it in neutral, release the clutch, press in the clutch again, and try to put it in gear. If none of this works, have your transmission serviced.


Problem starting car why will it start in neutral sometimes and not start at all other times?

is it an automatic transmission? if not does it have a engine start button? in both cases mentioned the vehicle will have a solenoid in the gear shift lever or gearbox that prevents the vehicle being started in gear!


Where is the neutral safety switch located on a 1995 Toyota Camry?

The neutral safety switch on a 1995 Toyota Camry is located on the transmission. Specifically, it is mounted on the side of the transmission case, near the gear selector mechanism. This switch ensures that the engine can only be started when the transmission is in the "Park" or "Neutral" position. To access it, you may need to remove some components or covers around the transmission.


Where is the neutral safety switch on a Oldsmobile aurora 4.0?

In the Oldsmobile Aurora 4.0, the neutral safety switch is typically located on the transmission. It is mounted on the side of the transmission case, where it connects to the shift linkage. This switch ensures that the engine can only be started when the transmission is in the "Park" or "Neutral" positions. For precise access, consulting the vehicle's service manual is recommended.