answersLogoWhite

0

not really.new spark plugs should help to decrease hc emissions

hc emisions are caused by unburnt fuel which is usually caused by faulty spark plugs or faults in the ignition system which would cause the engine to misfire creating a rich mixture ie high hc (hydrocarbons)

User Avatar

Wiki User

17y ago

What else can I help you with?

Related Questions

Why is there no spark going into the spark plug for a 1987 Plymith Voyanger?

Do you need a new spark plug??


How do you fix a spark plug?

only way to fix a spark plug is to replace the problem plug with a new one


How do you change wire?

Spark Plug Wires? Remove them 1 at a time from the spark plug to the distributor or the ION pack, remove and replace the spark plug, add the new spark plug wire from the newly added spark plug to the distributor or ION pack.


How do you change the spark plug on a 2004 suzuki eiger 400?

To change the spark plug on a 2004 Suzuki Eiger 400, first, ensure the engine is cool and disconnect the negative battery cable. Remove the spark plug cap and use a spark plug socket to unscrew the old spark plug. Before installing the new spark plug, check the gap and adjust it if necessary. Finally, screw in the new spark plug, reconnect the spark plug cap, and reattach the battery cable.


How do you change spark plug on Honda rincon?

To change the spark plug on a Honda Rincon, first, ensure the engine is cool and disconnect the negative battery terminal. Remove the spark plug cap and use a spark plug socket to carefully unscrew the old spark plug. Before installing the new spark plug, check the gap and adjust it if necessary. Finally, screw in the new spark plug by hand, tighten it with the socket, reattach the spark plug cap, and reconnect the battery.


How do you know if spark plugs and wires are bad?

Take the spark plug out, push back into it's pocket, set the spark plug on a grounded piece of metal, have someone crank the engine while the spark plug is grounded (but don't hold onto the spark plug, common sense right?) if a spark appears between the little arm the spark plug works, if it doesn't spark, replace with a new plug, and if the new plug doesn't start you have a faulty wire.


How do I perform a weed eater spark plug replacement?

To perform a weed eater spark plug replacement, first ensure the engine is cool. Locate the spark plug on the engine and use a spark plug wrench to remove it. Check the gap on the new spark plug and adjust if necessary. Install the new spark plug by hand, then tighten it with the wrench. Finally, reconnect the spark plug wire and test the weed eater to ensure it is running smoothly.


How do you replace the spark plug on a 2004 Polaris Sportsman 700?

To replace the spark plug on a 2004 Polaris Sportsman 700, first, ensure the engine is cool and disconnect the spark plug wire. Use a socket wrench to remove the old spark plug by turning it counterclockwise. Before installing the new spark plug, check the gap and adjust if necessary. Finally, insert the new spark plug, tighten it securely, and reconnect the spark plug wire.


How do you change a spark plug on a suzuki jr 80?

To change the spark plug on a Suzuki JR 80, first, ensure the bike is turned off and cool. Remove the spark plug cap and use a spark plug socket and ratchet to unscrew the old spark plug from the cylinder head. Before installing the new spark plug, check the gap with a feeler gauge and adjust it if necessary. Finally, screw in the new spark plug by hand, then tighten it securely with the socket, and reattach the spark plug cap.


How do you change spark plugs on a Honda vtx 1300?

The spark plugs in a Honda VTX 1300 can be removed by first removing the spark plug wire. Twist the spark plug out, using a spark plug socket. Reverse the process to install the new spark plug.


How to replace spark plugs on a 2001 Honda accord ex?

Get a spark plug socket and unscrew the spark plug and replace with a new one.


How do you take out a spark plug?

You take off the cap. Then pull out the spark plug. Put a new spark plug in. Then put the cap back on. Voila your done. Easy as pie!