0
What else can I help you with?
How do you remove the tourqe converter bolts from a 1992 Nissan Pathfiner?
After you have removed the cover from the lower half of the torque converter housing and driveplate you can remove the four bolts that secure the torque converter to the driveplate. Remove them one at a time by rotating the engine so that each bolt comes into view at the bottom where you have removed the driveplate cover.
Where are the torque converter bolts on a 64' grand prix?
On the torque converter. Do a Google search and read about torque converters.
Do you have to drop the transmission to get to the flywheel bolts?
Torque converter bolts No. Fly-wheel bolts YES.
How does the torque converter hook up to the flywheel?
Usually with bolts.
How do you separate a frozen engine 96 Olds 3.1L from its transmission I have removed 2 of 4 converter bolts...Do I have to remove the eng trans as one unit Any help is greatly appreciated.?
UPDATE: I removed the engine with the torque converter. It was messy, and when I got the engine out I was able to unbolt the converter.
Where is the torque converter on a 1998 cavalier z24?
In the transmission held on by 3 bolts
What would cause a Knocking by the torque converter on a 1076 k5 blazer?
Loose converter bolts or a cracked pressure plate.
How do you take torque converter off of engine so you can mount the motor on a stand?
The Torque Converter is part of the transmission, not part of the engine. The torque converter needs to come off with the transmission. You need to remove the starter to access the torque converter bolts/nuts and separate it from the flex plate. Besides loosing all of the fluid in the torque converter, you stand to damage converter seals and/or the pump if the converter isn't properly installed in the transmission.
Is it possible to remove flywheel by just taking bolt out of torque converter and pushing the torque converter back?
nope. you still have the 6 18mm bolts that bolt the flywheel to the crank
How many bolts are in a dodge torque converter?
Most light duty engines have 4 bolts. Heavy duty have 6
Which bolt to remove engine from transmission on 1989 Pontiac grand am 2.5?
Bell housing bolts and the torque converter bolts.
What could happen with a loose torque converter?
If the torque converter is loose it can do alot of damage to the transmission too. My ex- had to replace the transmission because the bolts were not put in correctly when someone else had changed something out. He had to put in a new transmission and torque converter. If it is running too rough you may have to change it all out. Check the bolts first to make sure everything is tight. If it is then you'll probably need new trany and torque converter.
