The ignition barrel in a 1986 Mazda 323 is generally not interchangeable with later models or similar makes like the Ford Laser due to differences in design and key compatibility. While some parts may share similarities, the ignition systems are often unique to specific models and years. It's best to source a replacement specifically for the 1986 Mazda 323 to ensure proper fit and function. Always consult a professional mechanic or automotive parts specialist for accurate compatibility information.
To remove the ignition barrel on a 1990 Ford Laser, first disconnect the battery to ensure safety. Then, insert the key into the ignition and turn it to the "On" position. Look for a small release pin or screw on the ignition housing that you can access through a hole or slot; press or unscrew it while turning the key to the "Off" position to release the barrel. Finally, pull the ignition barrel out of the steering column.
Remove the steering column surround and you should see a black round thing on the left hand side, this is the ignition switch. Remove this and you will see there is one screw holding the ignition barrel on, remove and you then need to insert your key and turn it to the ACC position. you should now be able to withdraw the barrel using the key but take care not to snap the key off in the barrel
When one remove the focusing barrel of the laser diode.
Laser consumables refer to the parts that can be replaced in a laser cutting machines, such as filters, nozzles and optics. A laser cutter is a machine that cuts materials very accurately using a laser.
2 degrees BTDC
The toner powder in a laser printer is sealed inside a toner cartridge, and it is the wholecartridge that is replaced. A mono laser has a single cartridge, while a colour laser will have a cartridge for each colour.
Laser sight is a small visible-light or infra-red laser used to enhance the targeting of weapon systems. It can for example be mounted parallel to the barrel of a handgun or rifle.
There is no ignition module in a '84 laser. They have a coil and distributor unless it has been modified. If you don't get a spark across the points in the distributor when you try to start the engine you probably need a new coil.
haines manual
A damaged strut needs to be replaced.
ink
You need a gunsmith