Unfortunately the Taurus needs the AC Pulley to turn the water pump
you CAN get a bypass pully for 30 bux and use the same belt and routing
but the shorter no AC belt will not work on that engine
yes you can bypass ac with either a ac bypass pulley made by dorman or get a longer belt
To bypass your ac you can use a Valuecraft brand belt part # 360k4
what belt size to a 302 bypass for removal of smog pump and AC
88.50 in belt
You can't bypass with a belt alone. You have to by a bypass pulley kit. The new pulley takes the place of the ac compressor and you use the same size belt.
The size of belt to use to bypass the ac on a vortec s usually 5.7L. You should ensure that you have the correct bracket and belt size.Ê
There is an available bypass kit, but the belt is the same. You remove the ac compressor and install an idler pulley.
if you can reroute the belt to bypass the ac compressor all you need to work out is how much shorter the belt is that you would require
No you can not bypass the ac pulley but you can by a bypass pulley at the part store for about 40$. I just got one for my 2006 ford taurus the ac pump locked up and burned my belt it can take a while to put on but its worth it if you dont mind not having your ac working.
take and measure the routing of belt minus ac and put new belt on
need a diagram on how a serpetine belt goes on
You will need to buy and install an ac bypass pulley from Napa or other parts store to bypass the ac compressor.You will need to buy and install an ac bypass pulley from Napa or other parts store to bypass the ac compressor.