if you can replace it yourself but do it right look on the web for info vids
You will need to remove the exhaust manifold retaining bolts in your 1993 Chevy Astro. Remove the exhaust manifold. Remove the exhaust manifold gasket and clean the surface. Reverse the process to install the new exhaust manifold gasket.
there is one right below exhaust manifold and one right after the cat. they both have connectors and use and adjustable wrench should get the job done.
There are no tricks. It is part of the exhaust manifold.There are no tricks. It is part of the exhaust manifold.
To change the muffler or exhaust in a Chevy Venture, jack up the vehicle and locate the muffler. Spray penetrating oil on the nuts and loosen muffler clamps. Replace with new.
The exhaust manifold on a Chevy S10 truck is changed by removing the spark plugs, unbolting the manifold from the cylinder heads, and unbolting the collector. The manifold can then be removed from the vehicle and a new set put in its place.
To change the exhaust manifold on a 2001 Oldsmobile, first, disconnect the battery and remove any components obstructing access to the manifold, such as the intake or engine covers. Then, detach the exhaust pipes and unbolt the manifold from the cylinder head while ensuring you have a proper gasket for reinstallation. Replace the old manifold with the new one, reattach the exhaust pipes, and reconnect any components you previously removed. Finally, reconnect the battery and check for any exhaust leaks.
What engine???????? You should refer to repair manual if not familiar with auto repair and understand the terminology before attempting Remove nuts holding exhaust manifold to cylinder head & remove nuts/bolts holding exhaust manifold to exhaust pipes Use new exhaust manifold gaskets and install the new manifold securing the manifold to cylinder head (may need to but new nuts and or bolts) by "snugly" tightening manifold to cylinder head if not refering to repair manual
To change the exhaust manifold gasket on a 2002 Chevy Cavalier, first disconnect the battery and remove any components obstructing access to the manifold, such as the air intake and exhaust pipes. Then, unbolt the exhaust manifold from the engine block, carefully removing the old gasket. Clean the mating surfaces thoroughly before placing the new gasket and reassembling the manifold. Finally, torque the bolts to the manufacturer's specifications and reconnect any components you removed.
The year, engine size and if it is the intake manifold or an exhaust manifold gaskets would help.
It is in the exhaust manifold next to the firewall.
Hey Mario==It will be close to the exhaust flange and on some cars it is in the exhaust manifold. GoodluckJoe
there is no gasket on the exhaust manifold. i have a 93 escort lx wagon and i have a leak somewhere and i looked at the exhaust diagram at my local napa and it doesnt show a gasket. * Not sure which diagram you were looking at but there is DEFINITELY a gasket... Look up exhaust manifold on any popular car site and you will clearly see one.