Change turn signal on 2006 srx Cadillac?

Answer 1

Changing a turn signal bulb on a 2006 Cadillac SRX:

This is not a real hard job. The easiest way is to pull the front wheel of the side the bulb is out, more working room. Pop the 4-5 plastic holders on the inside wheel well skirt. Pull back the skirt and tie it to anything to hold it out of your way. You will see a box housing the turn signal light and fog light. There are 6 Torx screws on the back as you are looking at it. Take these out and the back of the housing will come off. A couple are hard to get to. You will see the back of the turn signal bulb, turn it and the socket and bulb will come out. Pull the bad bulb out, take the new bulb, put some silicone lube on the bulb connectors and the socket and pop the new bulb in. Check to see it works and then reassemble everything as it was. I have found that the socket sometimes needs to be replaced but if you check for cracks, clean it up & lube it you may be OK.

** Some say to pull the headlight & other stuff but this is the easier way, in my option.