In my 89 you need to remove the wheel and the inside wheel housing, to get full access to the antenna.
Remove the wiring harness from the bottom of your 1987 Chevy Corvette power antenna. Remove the power antenna retaining nuts. Reverse the process to install your new power antenna.
To replace the power antenna in a 1991 Chevrolet Caprice, start by disconnecting the negative battery terminal to ensure safety. Remove the interior trim panel adjacent to the antenna, then unscrew the old antenna from its mounting location. Disconnect the wiring harness and remove the antenna assembly from the vehicle. Install the new antenna by reversing the process, connecting the wiring harness, securing it in place, and reattaching the trim panel before reconnecting the battery.
how do I replace a power antenna on my jeep Cherokee 1992
under the dash left hand side or driver side behand the emergency foot brake pedal
how do you replace power antenna on 1988 deville
Chevy Caprice power rating for that year was 170hp.
pull out the passenger side inner fenderwell. once out you can get to all the things needed to remove/replace.
165 hp
To disassemble the power antenna on a 1992 Caprice Classic, first, disconnect the negative battery terminal to ensure safety. Then, remove the inner fender liner or access panel to reach the antenna assembly. Unscrew the mounting bolts or clips securing the antenna and disconnect the electrical connector. Finally, gently pull the antenna out from its housing, taking care not to damage any surrounding components.
260 HP and 330lb. tq. on the LT1 in the LS Caprice
No
Hi, If it's anything like my 87 then you will need to remove the drivers side rear wheel and the inside wheel housing. Once you have donee that you should have full access to the antenna.