pull out the passenger side inner fenderwell. once out you can get to all the things needed to remove/replace.
Installing a CB radio in a Chevy Impala begins which installing the mount and location a suitable power source. The radio is then mounted to the dash, wired up, and the antenna connected.
Remove the wiring harness from the bottom of your 1987 Chevy Corvette power antenna. Remove the power antenna retaining nuts. Reverse the process to install your new power antenna.
In my 89 you need to remove the wheel and the inside wheel housing, to get full access to the antenna.
how do I replace a power antenna on my jeep Cherokee 1992
how do you replace power antenna on 1988 deville
The 2009 chevy impala lt 3.5 has 211 horsepower but is a v6. You an get the 2009 chevy impala ss 5.3 which is a v8 with 303 horsepower
No
To replace the power steering pump on a Chevy Impala, first, ensure the vehicle is parked on a level surface and the engine is off. Remove the serpentine belt by releasing the tensioner, then disconnect the power steering fluid hoses from the pump. Unbolt the pump from its bracket, install the new pump, and reconnect the hoses. Finally, refill the power steering fluid, reattach the serpentine belt, and start the engine to check for leaks and proper operation.
Hi, If it's anything like my 87 then you will need to remove the drivers side rear wheel and the inside wheel housing. Once you have donee that you should have full access to the antenna.
Replace the power antenna assembly.
you dont
yes u can