answersLogoWhite

0

If your Denso sat nav stereo in the Ford Mondeo is not working while the function buttons are responsive, it may be due to a blown fuse, a loose connection, or a software issue. First, check the vehicle's fuse box for any blown fuses related to the stereo system. If the fuses are fine, try disconnecting and reconnecting the stereo to reset it. If the problem persists, consider seeking help from a professional technician or the dealership for further diagnostics.

User Avatar

AnswerBot

2mo ago

What else can I help you with?

Related Questions

Why has speedo stopped working on a 99 model mondeo?

Vehicle speed sensor approx £40 fitted.


Climate control not working on mondeo?

If the climate control is not working on a Mondeo the fuses should be checked. If the fuses are found to be working then the wiring feeds should be looked at.


The instrument panel and both rear lights seemed to have stopped working on your 96 mondeo i have replaced all the relays and the fuses are all intact and working?

The fault is in the switch itself, quite common on this age of car, the dash lights and rear lights are worked off the same contacts on the back of the switch, replacement is the usual answer,


Why aren't my number plate lights working on my 04 mondeo?

try changing the bulb, you can get them from halfords


Blower not working properly on your mondeo changed motor still not working right?

Chack the speed control switch and the resistor that controls the speed of the motor


Where do you find the fuse for the brake light on your s reg mondeo?

my brake lights are not working on my ford mondeo. i have replaced both bulbs and they still do not work.i am wondering if the fuse has blown , but i cannot locate it. can you help please?


How do you turn off the seat belt reminder system in a 2004 Ford Mondeo?

iv just done it on my 04 mondeo didn't mean to it just happened i was pushing the red button on it and it stopped so all i can say is play with the red button on the seat belt


Is it possibl to get another coded 2002 Ford Mondeo ignition key cut without going to ford - my car is a diesel and the key has three buttons on the fob for locking unlocking and also boot Thank you?

go to a locksmith that can do car keys they will clone mondeo key fobs but they r expensive


Will a mk1 mondeo handbrake cable fit a mk2 mondeo?

No, a Mk1 Mondeo handbrake cable will not fit a Mk2 Mondeo. While both models share some similarities, they have different designs and specifications for their handbrake systems. It's essential to use the correct part specific to each model to ensure proper function and safety. Always check compatibility before attempting to replace components.


Ford Mondeo p reg radiator fan not working fuse ok?

that would be either fan switch or temperature sensor


Ford Mondeo Rreg blowers only working on highest setting how can you repair this Is it a relay?

Most likely the heater motor resistor has failed


Is a 2001 mondeo mk2 or mk3?

depends on the shape of your mondeo