answersLogoWhite

0

when my 1998 Dodge Durango would start and cut back off, I had to reset the alarm by using the lock / unlock buttons on my key remote.

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

Why does your dodge durango stop running when the security light goes on and vehicle won start for a while after?

The red light indicates a failure in the security system. It will not start with a failure.


Why won't my Dodge Durango start even though it turns over has half tank of gas and a newer battery?

Check the starter! It happened to my 2000 dodge durango too.


98 dodge durango transmission will not start out in low gear?

speed sensor on transmission


What are the signs of a bad distributor cap for a dodge durango?

Misfires, hard start, no start, more often when wet.


Cars that start with letter D?

well, theres dodge, durango, datson, daimler, desoto


How does a blown radiator hose cause a 2000 dodge durango to not have spark and will not start?

A blown radiator hose could not cause a 2000 Dodge Durango to not have spark and not start unless the heat damaged the computer in the vehicle. Sometimes when an engine overheats, the computer that controls the firing can be damaged.


Why does your 1999 Durango turn off?

I turn it off to go shopping then will not start again


2003 Dodge Neon that will start up but will not stay running and dies right after it starts?

2003 dodge neon that will start but will not stay running and dies after it starts?


Everytime you start your 1998 dodge durango the abs light and brake light comes on and stays on untyll you shut the engine down after five minutes and start the engine again the lights turn off?

See http://autos.msn.com/research/vip/reliability.aspx?year=1998&make=Dodge&model=Durango . Under "Brakes". It's probably the Rear Axle Speed Sensor. Easy Fix. Do-It-Yourself. Search this site or Google "Replace rear axle speed sensor 1998 Durango"


How do you start tha egnition without breaking a Dodge Durango interior?

Try sitting in the seat and using the key.


How do you reset the keyless entry on a 2004 Dodge Durango?

Thanks to no help from Chrysler or Dodge....I ended up figuring this one out for myself. I hope this will help you out. Start your Durango and leave it running for about two minutes. Once you do this, press both the lock and unlock button on your keyless entry (key fob) and do this three times, each time holding it pressed down for about two seconds each time. After this, your keyless entry should be reset and working. This had to be done on my Durango after I changed my battery.


How do you reset keyless entry on a 2005 Dodge Durango?

Thanks to no help from Chrysler or Dodge....I ended up figuring this one out for myself. I hope this will help you out. Start your Durango and leave it running for about two minutes. Once you do this, press both the lock and unlock button on your keyless entry (key fob) and do this three times, each time holding it pressed down for about two seconds each time. After this, your keyless entry should be reset and working. This had to be done on my Durango after I changed my battery.