0
What else can I help you with?
Will a 302 bolt to a bell housing and a 3 speed trans in place of the 289 in a 66 mustang?
As long as the 302 is from a similar year it will bolt right in. The only difference between the 289 and 302 is the 302 has a slightly longer stroke.
Will a 6 cylinder 3 speed bolt up to a 302 engine?
Sorry, no.
Where is the speed sensor on a 1993 F-150 302 Supercab with electronic speedometer?
in the tranny. You can get to it from under truck. look for a plug with wires. Unplug it, take out the retainer bolt, remove the sensor. Take off the gear and put on new sensor
Will a ford 302-351w bolt to a 300 six cyl 4 speed bell housing?
The Ford 302 engine will not bolt to the 300 six-cylinder bell housing. A new bell housing or a Bell housing modification kit will need to be used.
Do an amc 304 and ford 302 have the same transmission bolt pattern?
no a 258 amc and ford 302 have same bolt pattern
Can a granny 4 speed from an 84 ford f-150 with a 302 can it bolt up to a 460 ford motor?
if you change the bell housing
1974 Ford Truck 302 4.7?
Ford calls their 302 cubic inch V8 a 5.0
What is the spark plug gap for a Ford 302 V8?
.044 inch in a 1979 Ford truck 302
What transmission would fit a 302 1978 ford ranger engine?
A 1978 Ford Ranger with a 302 engine typically uses a transmission that is compatible with the small block Ford engine. The most common options include the Ford C4 automatic transmission or the Ford Toploader four-speed manual transmission. Depending on your specific setup and preference for automatic or manual, either of these transmissions would work well with the 302 engine. Always ensure to check compatibility with your vehicle's configuration and any modifications that may have been made.
How do you balance a 1982 302 engine in a standard transmission F150 truck when it came out of an automatic transmission truck?
The 302 is alredy balanced. You do need to install a piolet berring in the rear of the crankshaft.
Will a 4 speed manual transmission from a 302 bolt up to a v8 400?
If your talking about the 400(m) style motor then no it won't. The 400 has the "big block" bolt pattern, you would need a 4 sp from a big block motor to fit.
Will a 302 V8 bolt onto the standard 5 speed tranny?
yes it will bol up if its the same trans as the f150 6 cylinder but you need the clutch and pressure plate for the v8
