Codes P0732 and P0733 on a 2001 Ford Windstar indicate issues with the transmission's second and third gear ratios, respectively. Common fixes include checking and topping off the Transmission Fluid, inspecting for leaks, and ensuring proper fluid pressure. Additionally, it's important to examine the transmission filter and solenoids for blockage or failure. If these steps do not resolve the issue, a more in-depth diagnostic may be needed, potentially involving transmission rebuild or replacement.
went to emission and fail.The codes gave was p0732 and p0733 ratios. she said turn on the car engine light don't on gages.
P0733 = Gear 3 ratio incorrect. Take it back to who ever rebuilt the transmission. They probably used parts that didn't match your original.
Trouble code P0733 means:Gear 3 incorrect ratio
Trouble code P0733 means:Gear 3 incorrect ratio
Trouble code P0733 means:Gear 3 incorrect ratio
Trouble code P0733 means: A/T Additional Gear Ratio Error In Third Gear
Trouble code P0733 means: Incorrect gear ratio, third gear Trouble code P0734 means: Incorrect gear ratio, fourth gear
Trouble code P0733 means: Incorrect gear ratio, fourth gear
P0731 is 1st gear incorrect ratio. P0715 in the input speed sensor.Check the Input and output speed sensor located on the transmission. One or both are faulty. Input in on top towards torque conveter the output towards the end or driver side of transmisstion.
Transmission Fault: Gear 3 incorrect Ratio Check your transmission fluid level.
Usually any good mechanic can check the tranny.
The P0733 code indicates an issue with the transmission, specifically that the transmission is stuck in third gear. To fix this, start by checking the transmission fluid level and condition, as low or dirty fluid can cause shifting issues. Inspect the transmission control module (TCM) for faults and consider testing or replacing the speed sensors. If necessary, a professional diagnostic scan may be required to pinpoint any underlying issues.