The 1997 Jeep Grand Cherokee power door lock fuse can be found in the fuse box. The fuse will be in the first column, third from the bottom.
The 1990 Jeep Grand Cherokee power locks wiring diagram can be obtained from most Jeep dealerships. The wiring diagram can also be found at most auto-parts stores.
A very common problem is to have broken wires in the harness going to the driver side door.
No. They are not interchangeable.
Check for a broken wire in the harness going to the drivers door.
The fuse for the power locks on a 1998 Jeep Cherokee is located in the fuse box under the dashboard on the driver's side. You can find the specific fuse for the power locks by referring to the fuse diagram on the cover of the fuse box or in the owner's manual. Typically, it will be labeled as "Power Locks" or similar. Make sure to check the fuse and replace it if it's blown to restore functionality.
Which ever one or ones are making the noise, the lock actators have gone bad. The actuator comes as part of the door latch.
(Junction Block) power
Test for power at the seat with a 12V tester. You may have a bad seat motor.Door locks are a separate circuit.
location of the fuse box panel is at the front passenger side on panel near door inside is fuse on panel is a brief description of what fuse is where
The only differences are between a regular Cherokee and a Grand Cherokee.
Either near the hinge of the passenger door or under the hood in the main relay box near the battery.
To find out if a 2000-2004 Jeep Grand Cherokee power steering gear box will fit on a 1999 Jeep Grand Cherokee, call your nearest DIY auto parts store