0
How can you convert front end alignment data from inches to degrees i need data for a 65 el camino?
Find the sine of the angle from the toe required per side/wheel (inches) divided by the diameter of the wheel rim (inches) For example 1/16th inch total "toe-in" which is 1/32" per side = 0.03125" Assuming a rim diameter of 15" Toe angle per side is sine of 0.003125/15 = 0.002083 equivalent to 0.119366 degrees which is also 7.16 minutes. Total toe-in is double the per side toe-in, in this case 14.32 minutes. Ray
What else can I help you with?
How do you convert tire camber degrees into inches?
3.50 degrees to inches
What are the wheel alignment calibration specifications for a 2004 Hyundai XG 350L?
For the front wheels the caster setting is 3.15 degrees and the camber is 0 degrees with a toe in of 0 inches. For the rear it is -0.5 degrees of camber and 0.08 inches toe in.
What are the wheel alignment specs for a 1996 s10 truck?
Caster 2 to 4 degrees Camber -1 to 1 degrees Toe 0 to .2 inches
Length of 1967 El Camino car?
The length of a 1967 El Camino is approx 194 inches The width is approx 72 inches
What are Alignment specs for 2007 dodge 3500 4x4?
The castor settingÊis positive 4.7 degrees. The camber setting is positive 0.25 degrees. The toe in is 0.10 inches.
How many inches are in 20 degrees?
Degrees and inches are not directly convertible units of measurement. Degrees are used to measure angles, while inches are used to measure length. The conversion between degrees and inches would depend on the specific context or application.
How long is a 1978 El Camino?
187 inches
What are the alignment specs for a 2009 Hyundai accent?
The alignment specifications for a 2009 Hyundai Accent typically include a caster angle of around 3.0 degrees, a camber angle ranging from -0.5 to +0.5 degrees, and a toe angle of approximately 0.08 inches for the front wheels. For the rear wheels, the camber should be around -1.0 degrees, with toe specifications around 0.0 inches. However, it’s always best to consult the vehicle's service manual or a professional technician for precise alignment settings.
How do you convert camber degrees to inches?
To convert camber degrees to inches, you can use the formula: ( \text{Inches} = \tan(\text{degrees}) \times \text{distance from the pivot point to the ground} ). The distance from the pivot point to the ground is typically the radius of the wheel or the height at which the measurement is taken. For small angles, the tangent of the angle is approximately equal to the angle in radians, which simplifies the conversion process.
How many inches in 23c?
23C is a temperature (23 degrees Celsius). You cannot convert a temperature into a distance.
What are the wheel alignment specs for a 2009 cobalt?
The wheel alignment specifications for a 2009 Chevrolet Cobalt typically include a front camber angle of -0.5 to -1.5 degrees, a front toe setting of 0.10 to 0.25 inches, and a caster angle of 3.0 to 5.0 degrees. The rear camber should be around -0.5 to -1.5 degrees, with a rear toe setting of 0.10 to 0.25 inches. It's always best to consult the vehicle's service manual or a professional technician for the most accurate and specific alignment settings.
What are the wheel alignment specs for a 2010 Hyundai Santa Fe?
The wheel alignment specifications for a 2010 Hyundai Santa Fe typically include a front camber of -0.5 to -1.5 degrees, front toe of 0.03 to 0.13 inches, and a caster angle of 3.2 to 4.2 degrees. For the rear, the camber should be between -0.5 to -1.5 degrees, and the toe should be set to 0.05 to 0.15 inches. It's always best to consult the owner's manual or a professional for the most accurate specifications based on your specific vehicle and alignment needs.
