0
What else can I help you with?
How do you remove the front seat in a Ford Taurus-2004?
There is a little lever on the bottom of the seat. Pull that out and close the seat so that the backrest is touching the bottom of the seat. Then pull out the handle on the side of the back of the seat. The seat will then unlock from the hinges.
How do you remove the rear seat back in a 1992 Chrysler LeBaron Convertible?
To remove the rear seat back in a 1992 Chrysler LeBaron Convertible, first, locate the retaining bolts at the bottom of the seat back; these are usually accessible from the trunk. Use a socket wrench to remove the bolts. Once the bolts are removed, gently pull the seat back upward and away from the seat base to detach it. Be cautious of any clips or connectors that may also need to be released.
How do you remove the rear seat bottom and back cushion from a 2001 Ford Taurus?
The seat track is bolted to the floorboard. ANSWER: my 2001 Taurus had clips for the rear seat cushion where if you push the cusion twords the rear of the car then pull upward the cushion should come off...
Where is the fuel pump located on a 1992 Toyota Paseo?
in the fuel tank but access is under back seat... Remove back seat and fuel pump is easy to take out..
Where is the best place for a ground with sub woofers on a 1992 Saturn SC2?
the best place is to remove the center seat belt in the back seat and bolt it to that...
How do you remove the seat on a Kawasaki vulcan 700?
there are two bolts in the back of the seat. remove them and then slide the seat back about an inch and remove
How do you remove the back seat of a Scion xb?
how to remove 2004 scion back seat
How do you remove the front seat of a 1992 Acura Legend?
There should be four bolts under the seat, move the seat all the way back then take the front two out than move it all the way forward and remove the back two, after that unhook any wires there are connected
How do your remove the rear seat on a 1992 Dodge Dynasty?
First you have to remove 1/4" nut screws in the front of the bottom part of seat and remove. Then on the back part of seat there will be 2 1/2" (I think) bolts that also fasten the seat belts which will need removed. once you have done that push up on back part of seat and pull towards you. That's all you need to do.
How to remove backseat of a skylark?
To remove the back seat of a Skylark, reach into the area between the back and the seat and pull up on the seat. The back part of the seat is bolted in and will require a socket wrench to remove.
How do you change the speakers in a 1992 geo prism?
remove the rear seat (bottom) pops right out from front. remove the rear seat (back) two nuts on the floor. the rear speaker deck slides out.
How do you remove back seat on 1992 Chevy K1500?
usually by lifting the seat up. Look at the hinges for a bolt on each side. Take the bolt out and the seat will slide off the pivots. CAUTION!!! You will need an assistant and it will help to remove the front seat(s) first.
