0
what year is it i do not think it matters but at the front there is a plastic piece with the air vents at the bottom are 2 Philips head screws one on each side then it will pull of and there is screws on the radio that hold them in remove these then side the radio forward and disconnect the plugs and unscrew radio ground and unplug antenna i hope this helps i did this on my 1989 Ford Festiva
What else can I help you with?
How do you replace the radio in a ford festiva?
To replace the radio in a Ford Festiva, start by disconnecting the car battery to ensure safety. Remove the trim panel around the radio using a flathead screwdriver or trim tool, then unscrew and slide out the old radio. Disconnect the wiring harness and antenna cable from the back of the radio. Finally, connect the new radio's wiring harness and antenna, secure it in place, and reattach the trim panel before reconnecting the battery.
When was Ford Festiva created?
Ford Festiva was created in 1986.
What do the stripes indicate on the green and blue wires on a 1992 Ford Festiva radio harness?
speaker wires
How do you remove instrument cluster on 1992 Ford Festiva?
http://www.clubprotege.com/wil/howto/tachometer/index.htm
How do you remove radio from 2006 Ford F-250?
how do you remove the radio from an 06 f250
How do you remove the radio from a 1996 Ford F-350 truck?
how do u remove the radio from 1996 f 350 ford truck
How do you get the door trim off a 1997 Ford Festiva?
How do you get the door trim off a 1997 Ford Festiva?"
Where is the fuse for a 1989 Ford Festiva heater blower?
where is the heater fan located on a89 ford festiva
How to remove factory radio from 2004 ford f150?
How to remove the factory radio and disconnect wirring harnes in a 2004 f150 ford truck
How do you install CD player in 1990 Ford Festiva?
Install a CD player in ford festiva wb model
How do you remove radio from 2012 ford e 250?
2012 ford e-250 radio removal
How do you replace a rotor on a Ford Festiva?
remove the rim, remove the two bolts that hold the caliper on, remove the two disc retainer screws and the disc will pull off the hub assembly.
