answersLogoWhite

0

Getting to the pump is the hard part, removal is easy.

  1. Remove the diagonal brace, battery and coolant recovery tank if located on the passinger side Getting these out of the way create working room.
  2. Remove the serpentine belt or belts if supercharged.
  3. Located the Power Steering pump and pump out as much fluid as you can with a hand cranked or electric oil change pump.
  4. The pump is attached to the block with two bolts that are accesses through holes cored in the power steering pump pulley. Remove the two bolt and pull the pump away from the block (toward the wheel well).
  5. Disconnect the hydraulic lines and the pump is in your hands.
  6. Reverse the procedure for installation and fill the pump to the "cold" level on the dip stick.
  7. Reinstall the coolant recovery tank, battery and diagonal brace.
  8. Start the engine and turn the steering wheel from lock to lock 5 times and recheck and adjust pump fluid level if necessary.
User Avatar

Wiki User

14y ago

What else can I help you with?

Related Questions

How do you fix Grand am 1978 power steering leak?

replace the part leaking


How do you replace power steering seals in a 2004 Pontiac Grand Prix?

To replace the power steering seals in a 2004 Pontiac Grand Prix, first, safely lift the vehicle and remove the power steering pump from the engine. Drain the power steering fluid, then disassemble the pump to access the seals. Replace the old seals with new ones, ensuring they are properly seated, and reassemble the pump before reinstalling it. Finally, refill the power steering fluid and check for leaks while turning the steering wheel to circulate the fluid.


How do you Replace Steering wheel fluid?

Remove the plug on the bottom of the power steering fluid pump. Drain the power steering fluid out. Replace the plug to the bottom of the power steering pump. Replace the power steering fluid.


Power steering 1994 grand am problem?

problem with power steering 1994 Pontiac grand am 2.3L


Where is the power steering reservoir on a 2006 grand prix?

where is the power steering reservoir on a 2006 grand prix


How do you replace the the power steering fluid on a 1993 Pontiac Grand Am GT?

you dont have to you just add more if low


How do you replace the belt on power steering pump?

What have to do replace the belts water pump power steering


Where is the power steering resevoir on a 2005 Pontiac grand prix?

Where is the power steering resevoir on a 2005 pontiac grand prix?


How do you replace the power steering high pressure hose on a suzuki grand vitira?

To replace the power steering high-pressure hose on a Suzuki Grand Vitara, first, safely lift the vehicle and remove the front wheel for better access. Drain the power steering fluid and disconnect the negative battery terminal. Unbolt the old high-pressure hose from the power steering pump and the steering gear, then remove it. Install the new hose by reversing the removal steps, ensuring all connections are secure, and refill the power steering fluid before testing the system for leaks.


How do you replace the power steering pump on a 2004 Mercury Grand Marquis?

To replace the power steering pump on a 2004 Mercury Grand Marquis, start by disconnecting the negative battery cable and draining the power steering fluid. Remove the serpentine belt by loosening the tensioner, then detach the pump's inlet and outlet hoses, and unbolt the pump from the bracket. Install the new pump by reversing these steps, ensuring all connections are secure, and refill the power steering fluid before testing the system.


How do you replace a power steering hose in a 2003 Jeep Grand Cherokee?

Take the old one off and put the new one on.


How do you replace steering rack audie a4?

How to replace power steering pump on Audi