How to replace Power Steering pump on Audi
To remove the steering rack from a 1996 Audi A4 2.8, first ensure the vehicle is securely lifted and supported. Disconnect the battery, then remove the front wheels and any necessary underbody covers. Detach the tie rod ends from the steering knuckles, disconnect the steering column from the rack, and then unbolt the rack from its mounts. Finally, remove the hydraulic lines and carefully slide the steering rack out of the vehicle.
No, the 02 A4 has a different front suspension- multi-link.
if you have the b5 chasis then look here http://www.audiworld.com/tech/misc-40.shtml
Go here :http://www.audiworld.com/tech/misc-40.shtmlfor full write with photos
To replace the power steering pump on an Audi A4 2.4L, start by disconnecting the negative battery terminal and draining the power steering fluid. Remove any components obstructing access to the pump, such as the serpentine belt and brackets. Disconnect the power steering hoses and electrical connections, then unbolt the pump from its mounting. Install the new pump by reversing the removal steps, ensuring all connections are secure and refilling the fluid before testing the system.
On an Audi A4, the power steering fluid reservoir is located in front of the coolant tank. It appears as a square-shaped black container with a green cap.
The 1998 Audi A4 OBD 2 port is on lower dash, left of steering column
it is the powering steering pump and or PS fliud leak
The power steering pump on an Audi A4 is changed by draining the coolant, removing the radiator hoses, and pulling the accessories from the front of the engine. The pump can then be unbolted, the gasket replaced, and the new pump installed.
Where is the answer
Under the steering wheel.
How much does it cost for a new starter on a 2000 audi a4 1.8t not quattro?