0
To add coolant to a 1998 Trans Am, first ensure the engine is cool to avoid burns. Locate the coolant reservoir, which is typically a translucent plastic tank near the radiator. Remove the cap and add a mixture of coolant and water (usually a 50/50 ratio), filling it to the appropriate level indicated on the reservoir. After filling, replace the cap securely and check for leaks before starting the engine.
What else can I help you with?
Where do you add AC coolant to a 1998 Infiniti I30?
low pressure line
Where do you add coolant to 1998 range rover?
Add coolant to the overflow tank in the engine compartment near the fuse box on the right side of the vehicle near the firewall.
How Do you Bleed The Coolant System On A 1998 Beetle?
To bleed the coolant system on a 1998 VW Beetle, remove the top from the overflow tank. Run the car for 10 to 15 minutes to force any air out of the system, then check the coolant level. Add coolant as needed.
How Do you Bleed The Coolant System On A 1998 2.0 Beetle?
Start by taking the top off of the coolant overflow reservoir. To bleed the system, run the 1998 VW 2.0 Beetle about 10 minutes, then check the coolant level. Add coolant if needed, then replace the reservoir top.
How do you remove the radiator off a 1998 Lincoln continental?
You would remove it from underneath. There is a cross member which holds the bottom of the radiator and you remove this, after unhooking all the lines (trans coolant and engine coolant) and draining the radiator.
Where is the transmissin filter to add transmission fluid on a Cadillac catera 1998?
where can i add transmission fluid on a cadillac catera 1998 you don't, they are maint. free so no dip stick. if there is a problem with it, dealer or trans shop.
How much coolant do you add in an 98 Chevy Malibu?
How much antifreeze does a 1998 chevy mabilu ls take
How do you put coolant in 1998 volvo v70?
To add coolant to a 1998 Volvo V70, first ensure the engine is cool to avoid burns. Open the hood and locate the coolant reservoir, which is typically a translucent plastic tank near the radiator. Remove the cap and add a 50/50 mix of coolant and water until it reaches the "full" line. Replace the cap securely, and check the system for any leaks after filling.
Where do I add coolant on a 1998 Chevy lumina?
To add coolant to a 1998 Chevy Lumina, locate the coolant reservoir, which is typically a translucent plastic tank near the radiator. Remove the cap, and if necessary, use a funnel to pour the appropriate coolant mixture (usually a 50/50 mix of antifreeze and water) into the reservoir until it reaches the "Full" line. Ensure the engine is cool before adding coolant to avoid burns or injury. Always check for any leaks and monitor the coolant level regularly.
What coolant for 2001 Trans Am?
Original equipment was DexCool.
How to Add coolant to 1991 lumina?
how to add coolant to 1991 lumina?
How do you Add trans fluid to 1998 corvette?
Same as any other vehicle with an automatic transmission.Through the transmission dip-stick tube.
