To add coolant to a 1998 Chevy Lumina, locate the coolant reservoir, which is typically a translucent plastic tank near the radiator. Remove the cap, and if necessary, use a funnel to pour the appropriate coolant mixture (usually a 50/50 mix of antifreeze and water) into the reservoir until it reaches the "Full" line. Ensure the engine is cool before adding coolant to avoid burns or injury. Always check for any leaks and monitor the coolant level regularly.
how to add coolant to 1991 lumina?
How much antifreeze does a 1998 chevy mabilu ls take
the low pressure{or suction}line is located under the air filter housing
Generally via. the coolant reservoir holding tank in the engine compartment. Just look for the white plastic tank with the lid showing radiator info.
add to coolant recovery tank!!!
4.5 Then check it. May take closer to 5.
no cap, just the coolant tank, add to this to add coolant../
Replace the coolant temp sensor.
if u have not done any work on the a\c before and u need to "add coolant" then u more than likely have leak somewhere wich needs to addressed first.
You put the fluid in the dipstick tube.
The cost of a starter for a 1998 Chevy Lumina typically ranges from $100 to $250, depending on whether you choose an aftermarket or original equipment manufacturer (OEM) part. Labor costs for installation can add another $50 to $150, depending on the mechanic's rates. It's advisable to check with local auto parts stores or mechanics for precise pricing.
cold engine only remove the radiator cap and pour then fill to cold line on the reservoir