Which are you referring to? Brakes or manual transmission slave cylinder?
Either way, you need to find the bleeder. You will more than likely need a second person to help you.
Get a manual on the vehicle for more details.
unfortunately Saturn went out on a limb to produce easy swappable parts in their cars. the clutch hydraulic system can not be bleed. it was intended on being replaced as an entire unit, filled with fluid and bleed at the factory. I've made many trips the salvage yards to obtain a entire assembly.
The clutch is not adjustable, it's hydraulic and as such adjusts itself. The problem you are describing is the result of a failed clutch system, typically a leaky hydraulic component.
No clutch cable... Saturns use a hydraulic clutch system for all manual transmissions.
The system needs to be replaced as a whole. Saturn does not let you bleed the Slave, it comes pre-bled.A Haynes manual will walk you through step by step
1993 Saturn sl2
do a 99 Saturn sl2 have a transmission pan gasket
saturnfans.com
How do you install 2002 saturn sl2 4 cyl
The 1993 Saturn SL2 does not have an inertia switch. Inertia switches are typically found in vehicles equipped with fuel pumps that need to shut off in the event of a collision, but Saturn models from that era did not include this feature. Instead, the fuel system in the SL2 is controlled by a standard relay and fuse arrangement.
yes
The Saturn SL2 was produced from the years 1990 to 2002 in the United States. The best way to tell if the fusible link in a 1999 Saturn SL2 is fried is that there will be no 12v.
7 quarts of coolant will fill your sl2