0
Press on the brake peddle several times till it gets firm, than have someone push on the brake "normal" presserm, and get under there and on the brake caliper, will be like a little bolt, slowly turn it "open" and when brake fluid starts coming out, twist it tight, then have then press on the brake again and repeat till know more air comes out. Do the same on each side & each end, but after each side check your brake fluid and fill it back up as needed. Hope this helps.
What else can I help you with?
Do you need to bleed all brakes when you change front brake pads for 96 Chevy Blazer?
Does this Blazer have four wheel disc Brakes? NEW ANSWER: There's no reason to bleed brakes if you did not open the system.( where brake fluid came out )
How do you bleed brakes on a 2004 Chevy 2500 truck?
If you have to ask how to bleed brakes, do not do it yourself.
How do you bleed abs brakes on a 1998 Chevy truck?
Having ABS does not change how you bleed the brakes. Bleed them as you would if it did not have ABS.
How do you bleed ABS brakes for a 1989 Chevy silverado?
Loosen the bleed valve
How do you get your back brakes to bleed on my 96 Chevy 2500 silverado?
First id have to get my back brakes on your Chevy 2500 silverado.
How do you bleed a clutch in a 93 Chevy Blazer?
it takes 2 people,1 to pump the clutch pedal and the other to bleed it from underneath at the clutch slave cyl. but remember to keep the reservoir full at all time. it is kind of like bleeding the brakes on your car
How do you fix the front brake line on a 1999 Chevy blazer?
Replace and bleed line
Why do my Brakes feel spongy on a 97 Chevy Malibu?
the most probable cause is, there is air in system, bleed brakes
How do you bleed the clutch on a 1983 Chevy s10 blazer?
The same way you would for brakes. Pump the clutch 4 or 5 time and hold down then open the bleeder valve to release the air. Is it the 2.8L V6 motor?
How do you bleed brakes on a 1996 Chevy pickup?
same way you would on any other vehicle
How do you bleed brakes on a 2000 Chevy 1500?
you can gravity bleed by opening up bleed valves,pump them up using a someone to open bleeder valves when there is pressure,vacuum bleed with a vacuum pump ,but you might have to use a scan tool to open up abs solenoids to bleed brakes.
How do you install rear brakes on Chevy Impala?
Watch how you take them off and put them back on the same way. Then you have to bleed them since there drum brakes
