Most EGR valves are located on the intake manifold with a vacuum line attached. Most are held on with two bolts.
Where is the ERG valve located on a Chevy Vandura 5.7 350 engine?
An ERG is a unit of work. An EGR is a valve that usually sits on the manifold and is controlled by a vacuum diaphram.
First of all it is an EGR valve obtain a new one and put it back where the old one was.
The ERG valve on a 1999 Chevy Express van is near the carburetor. It is bolted on the intake manifold.
Right on top of the valve cover
If you want to find the EGR valve you have to look for metal pipes coming out of the exhaust manifold[s] that don't lead to tail pipe. Then follow those pipes. Can't miss it.
If your EGR valve is vacuum operated, simply remove the vacuum hose from the valve.
I changed erg valve o2 sensor and gas cap but lights back on what do I do
"EGR" valve?
To change the ERG (Exhaust Gas Recirculation) valve on a 2001 Ford Escape, first disconnect the negative battery cable. Remove any necessary components for access, including the air intake duct if needed. Disconnect the electrical connector and vacuum hoses from the EGR valve, then unbolt the valve from the engine. Install the new EGR valve in reverse order, ensuring all connections are secure before reconnecting the battery.
If you mean the EGR (exhaust Gas Reclaimer), no.
do you mean the EGR valve? it's at the base of the intake manifold