To change the radiator in a Pontiac Aztek, start by ensuring the engine is cool and disconnect the battery. Drain the coolant by removing the drain plug at the bottom of the radiator and disconnect the upper and lower radiator hoses. Remove any mounting bolts and the fan assembly if necessary, then pull out the old radiator. Install the new radiator by reversing the process, reconnecting the hoses, and filling the system with coolant.
Pontiac Aztek was created in 2001.
To change the heater core on a Pontiac Aztek, locate the heater core on the firewall, passenger side of the vehicle. Remove bolts on the firewall and the clamps on the hoses. Take out the old heater core and replace with new. Tighten bolts and hose clamps. Then check to make sure the radiator is full of antifreeze.
front or back? 2wd or awd? what year?
Removing the serpentine belt on a Pontiac Aztek requires loosening the adjustment pulley. Once the pulley is loose the serpentine will have enough slack to come off.
Read you owner's manual.
fuse abs pontiac aztek 2002 located
Go to Autozone, when you purchase the bulbs, they'll put them in for free
AnswerCould someone post directions on how to change the thermostat on a 2002 Pont. Aztek? Is it any different than a 2003?It shouldn't be any different....
Where is the fuel shut off on 2002 aztek
Before changing the radiator on a 2001 Pontiac Montana the coolant must first be drained. After the drain remove the radiator mounts, fans, and hoses. Pull the radiator upwards.
first replace the tires of the aztek. then take a reciprocating saw, and cut the car in half.
23