To change the serpentine belt on a 1991 Dodge Dynasty, first, ensure the engine is off and cool. Locate the belt routing diagram, usually found on a sticker near the radiator or under the hood. Use a wrench to relieve tension on the belt by rotating the tensioner pulley, then slide the old belt off the pulleys. Install the new belt following the routing diagram, ensuring it is properly seated on all pulleys, and release the tensioner to apply tension to the new belt.
Its going to be on the left side of the transaxle
Tighten it or replace it.
every 80 to 100,000 km is best you do not want to have a timing belt failure, if your timing belt fails at best you will have a no start situation at worst you can kiss you engine good-bye
You can get a belt diagram for your 1991 Dodge Dakota 3.9 liter engine, at most Dodge dealerships. Most auto-parts stores will give you a belt diagram when you purchase a new belt.
On my 91 it was easy There is a spring loaded pully that has a #15 metric nut you need a long handle breaker bar to loosen the belt and follow the picture under the hood to reinstall theres
I've only done it on a 3 L so I don't know little details of other engines, but in order to change it on a 3L you have to remove all the belts, undo the passenger-side motor mount, remove the timing cover and loosen the timing belt tension idler, replace the belt and reassemble everything.
I've just gone to service :)
Every 60,000 miles.
To change the headlight switch on a 1991 Dodge Dynasty, first disconnect the negative battery cable to ensure safety. Remove the lower steering column cover by unscrewing any screws, and then carefully pull it away. Locate the headlight switch, disconnect the wiring harness, and unscrew the switch from the dashboard. Replace it with the new switch, reconnect the wiring, and reassemble the steering column cover before reconnecting the battery.
2.4 Lt pintara has not got timing belt, it is a chain. They only 2.0Lt has got timing belt
To change the electric window motor in a 1991 Dodge Dynasty, first, disconnect the negative battery terminal to ensure safety. Remove the door panel by unscrewing any visible screws and carefully prying it away from the door frame. Once the panel is off, locate the window motor, disconnect its wiring harness, and unbolt it from the door. Replace it with the new motor, reassemble the door panel, and reconnect the battery.
wondering how the motor is like to see specs seems like its good and kinda fast its in 91 dodge dynasty