You need three Polocks!
Before replacing the headlight bulbs on a 1997 Acura CL prop the hood open. Locate the headlight housing and remove the old bulbs. Install the new lights.
read the manual
There are two bolts holding the headlight buckets in, you will need to remove them to get at the bulbs. The lens will come out and you will pull the bulbs out of the lens itself. They are hex head bolts, DO NOT TURN THE TORX SCREWS THEY ARE THE ADJUSTING POINTS FOR AIMING.
To change the headlight bulbs on a 1997 Eurovan, first, open the hood and locate the headlight assembly. Remove the electrical connector from the back of the bulb, then twist the bulb socket counterclockwise to release it. Replace the old bulb with a new one, making sure not to touch the glass part of the bulb. Finally, reinsert the bulb socket and reconnect the electrical connector before testing the headlights.
Take the light assy off and take the bulbs out the back.
open hood two pins with rubber caps hold lights in. pull them up and out light will then fall out change bulbs and reinstert pins
There are many bulbs on a vehicle, need to know which bulbs you want to change.
There
my peugeot 306 has a twin headlight on drivers side and a single unit on passenger is that normal
change a headlight on a 1997 plymoth voyager
I read this also in my owners manual for my '97. But I was able to squeeze my hand in and change the bulb without removing the headlight. I changed both bulbs this way and I do not have small hands. Good luck!
You will probably have to take the complete headlight assembly out or loose to be able to get to the bulbs.