The Crank position sensor is located on the right side behind the wheel about midway up the motor eaiseier to get to from the bottom with 10mm socket one bolt
It is on the front driver side of the timing cover.
Yea, the crankshaft sensor is under the distributor and the camshaft sensor is inside the distributor, you cannot change it so you will have to replace the whole distributor.
Loss of fuel (fuel pump) loss of ignition ( crankshaft or camshaft sensor or wiring)
With an o2 sensor socket.
The camshaft position sensor on a 2002 Chrysler Concorde is located on the engine's cylinder head, typically near the front of the engine, close to the timing cover. It may be necessary to remove some components or covers for easier access. Always consult the vehicle's service manual for specific details and diagrams for your engine type.
The crankshaft sensor is located on the passengers side of the transmission housing, above the differential housing. The bottom of the sensor is positioned next to the drive plate. The cam sensor is located on the left bank cylinder head
The cam sensor is not adjustable.
The crankshaft sensor is located on the passengers side of the transmission housing, above the differential housing. The bottom of the sensor is positioned next to the drive plate. The cam sensor is located on the left bank cylinder head
No.
Bank one is the passenger side on a Concorde. Sensor one is before the catalytic converter.
it is an part of the distributor unit. you have to change out the entire distributor.
39.00