To change door pins on most vehicles, the old pin needs to be cut off with a blow torch. Then, the new door pin is welded in its place.
The bottom of the pins may have to be ground off to be removed. The pins are tapped upward to be removed. The door can be taken off to make access easier, or the door has to be supported to keep pressure off of the pins and to hold the door while the pins are out,
How do you change the door hinge pins and bushings on a 2002 GMC 1500 pickup truck?"
Look here http://www.hotrodders.com/forum/99-tahoe-door-pins-136678.html
go to youtube.com
Just a screwdriver will handle it!
To change the door pins and bushings on a Ford F-150, first, remove the door from the hinges by unscrewing the hinge bolts. Next, use a pin removal tool or a hammer and punch to carefully drive out the old door pins. Replace the worn bushings in the hinges, then insert the new pins and reattach the door to the hinges, ensuring everything is aligned properly. Finally, tighten the hinge bolts and check the door's operation.
To change the door hinge pins on a 1999 GMC Jimmy SLS, first, support the door with a jack or a helper to prevent it from falling. Remove the door panel if necessary for better access, then use a hammer and punch to drive out the old hinge pins from the hinges. Install the new hinge pins by aligning them correctly and tapping them in gently with a hammer. Finally, reattach any removed parts and check the door alignment and operation.
You can change the skin. Japan's, on your Oldsmobile automobile, by propping the door up, so it cannot fall. Pound the inch pins out with a chisel and hammer.
need to replace door hindge pins and bushing,how do we get door off safely.
My advice based on experience is to replace the entire hinge assembly.
There are three main types of door hinge pins available in the market: removable hinge pins, fixed hinge pins, and loose pin hinges. Removable hinge pins can be easily taken out for door removal or maintenance. Fixed hinge pins are permanently attached to the hinge and cannot be removed. Loose pin hinges have a pin that can be easily removed for door installation or removal.
Hey Lee==Simply remove the hindge bolts and remove the door. Some are welded on and you sometimes can remove the hinge pins. GoodluckJoe