My advice based on experience is to replace the entire hinge assembly.
I have a 1999 gmc 1500 sierra,need to replace door pins and bushings.door sagging.
To change the door hinge pins on a 1999 GMC Jimmy SLS, first, support the door with a jack or a helper to prevent it from falling. Remove the door panel if necessary for better access, then use a hammer and punch to drive out the old hinge pins from the hinges. Install the new hinge pins by aligning them correctly and tapping them in gently with a hammer. Finally, reattach any removed parts and check the door alignment and operation.
To change the upper door hinge on a 1997 Dakota, first, support the door with a jack or a helper to prevent it from falling. Remove the door panel if necessary to access the hinge bolts. Then, use a socket wrench to remove the bolts securing the upper hinge to the door and the body of the truck. After replacing the hinge, reattach the door and ensure it aligns properly before tightening the bolts.
jack the door up on the end of it and unbolt the hinge and replace with the new one.
Yes, you can change an upper door hinge without replacing the entire door. Simply remove the screws holding the old hinge in place, detach it from the door and frame, and then install the new hinge in the same location. Ensure that the new hinge matches the specifications of the old one for proper fit and functionality.
How do you change the door hinge pins and bushings on a 2002 GMC 1500 pickup truck?"
open the door then remove the bolts that hold the hinge to the door
door hinges attached to door and hinge post
The pin that slides into a door hinge is called a hinge pin. It is usually removable to allow for door removal or adjustment.
go to youtube.com
To replace the door hinge pins on a 1997 Jimmy you will need to open the door up. Place two jack stands on the front and back of the door's length at the bottom portion of the door for support. Remove the damaged hinge pin with the proper socket. Place the new hinge pin in place and secure it.
go to any auto store and buy new pins and bushings. open door, cut off pins. knock out the pins that are left after cutting. intall new bushings, then new pins,most times this can be accomplished with out removing hinges