you have to pull off the distributer the modual is under the roter held with to little screws
The ECM is the Engine Control Modual.
On the back side of the distributor facing the firewall , it will have to screws bolting it down to the distributor
the turn,hazard,park lambs are controled from the power modual on driver side fender well under the hood. it has a control modual attached to it. the power modual or fuse box has relays in it which power all the out side lights. these power moduals have printed circuits which are bad to fail causing the control modual fail also. usually you end up replacing the power modual and the control modual to fix the problem.
between my legs
Change the blinker bulb for that side. It is a hit and miss though. If you change the front bulbs and it still doesn't blink you will also need to change the rear bulbs. The front bulbs are rather difficult to change from above the vehicle. You may want to get underneath and definitely during the day!!! THE REAL ANSWER!!!!!! This drove me crazy on my daughters car. It turned out to be the day time running light modual wich is located behind the radio. the conections were loose. when you turn on the right turn directional the front light would go out but the rear directional would work. listen closley behind the radio for a one click noise when you activate the right turn, and also a delay one click when you deactivate.
ignition module on what?
You have to change out your Computer chip, flash your PCM, or install a Computer modual (upgraded) to change the air fuel mixture. Your engine's fuel air mixture is controlled by a computer, so in order to change that you have to change one of the above.
if you have good fuel pressure it will eliminate the fuel pump and or fuel pump relay. next i would guess it would be the i.c. modual. "ignition control modual" some people call it a distributor modual. it's inside the distributor. 170.00 at auto zone. goodluck,songwords "ignition control modual" is no longer in production very hard to find now.
USUALLY HAS TO DO WITH A FAULTY ABS MODUAL
maybe the ignition modual
This depends on make model and year of car
in the dist. theres a ignition modgual change it if you still dont have fire change the coil. im having the same problem. I replaced the head gasket to my lemans and never disturbed the timing or anything I markedt where everything goes and went together excellent. I replaced the coil and ign. modjual and put the dielec grease on the modual and still no fire. I rechecked everything. now what? I even replaced the sparkplugs and wires.