0
This is one of the best writeups I have seen and also has some links to others that have done it. http://www.jedi.com/obiwan/Jeep/d30axleseal.html He also has some nice info about mods to Jeep on his tech pages. I have done several of his & he documents well. I did the 15-20 gallon tank conversion and the remove restictor from stock air box (I have since replaced with a K&N & CATBACK & it runs even better). Check it out. It is not for the faint of heart. I had one done a long time ago on my 91 and now see it is leaking again so will have to dig into it. But I am also getting ready to do a frame off restore - due to rust so will probably do it at the same time. I found some GREAT rust free parts in Colorado Springs from Williams Restoration & a very good friend hauled them to Illinois for me. So this summer, the fun begins!
What else can I help you with?
How do you change front axle seals on a 1999 Jeep Cherokee Sport?
You have to remove the brakes, rotors, wheel hubs, axle shafts, diff cover, and differential carrier, seals are on the inside of the axle tubes.
Diagram for ford f250 diesel truck front axle?
drawing for bearings and seals of front differential axle
Does a 2006 Jeep Wrangler have rotors or drums on the front axle?
RotorsRotors
What kind of front axles come stock on a 2001 jeep wrangler sport?
The only factory front axle that came in a 2001 Jeep Wrangler is a D30.
What is the axle ratio in a 2005 Jeep Wrangler?
The ratio is on a tag on front and rear axle between 2 of the cover bolts
There is a hose coming out of the aft side of the front axle differential on my 1994 Jeep Wrangler what is it and where does it go?
That is the axle vent hose. It ties off to the body above the axle.
What should you pay to have axle seals fixed in a dodge ram 1500 1997?
That depends on what seals are leaking. The inner front axle seals will cost you over 6 hours of labor plus seals and fluid.So if your local labor rates are $100 an hour that will be over $600That depends on what seals are leaking. The inner front axle seals will cost you over 6 hours of labor plus seals and fluid.So if your local labor rates are $100 an hour that will be over $600
What size axle does a Jeep Wrangler sport have?
What size axle does a 99 wrangler sport have
How do you change rear axle seals on 2000 gmc 3500?
To change the rear axle seals on a 2000 GMC 3500, first, lift the vehicle and remove the rear wheels. Next, remove the brake assembly and the axle retaining bolts to pull out the axle shafts. After that, use a seal puller to remove the old seals from the axle housing, clean the area, and then install the new seals, ensuring they are seated properly. Finally, reassemble the axle shafts, brake assembly, and wheels, and lower the vehicle.
What front and rear axles come on a 2000 Jeep Wrangler?
Front axle is a Dana 30, rear axle is a Dana 35. There are a few Jeeps that have Dana 44's front and rear but this was a rare option.
What size socket do you need for a front axle nut on a 2000 jeep wrangler 4x4 sport?
36mm
If you have 2004 TJ wrangler how do you find out if the front axle has a limited slip or what it has?
It wasn't built with it unless it is a rubicon.
