answersLogoWhite

0

well if you are just changing the spark plugs and not the wires, take off one wire at a time from the end of the spark plug. you will need a deep spark plug socket to take off the plugs (turn them counter clockwise). take the old one out, toss it. if you can on the new one, put some anti-seizing compound on it (around the part that screws in). then using the SP socket, put it back in where the spark plug you took out was. don't over or under-tighten these though.

replace the wire on the spark plug, and move on to the next one. be sure not to mix the spark plug wires, or your firing order will be off.

User Avatar

Wiki User

16y ago

What else can I help you with?

Related Questions

1989 Oldsmobile Brougham Regency 98 change spark plugs?

where would the spark plugs at on a Oldsmobile 1989 engine


Do all 93 Ford Rangers 2.3l engines have 8 spark plugs?

Yes ( the 2.3 liter in the Ford Ranger from 1989 to 1997 has 8 spark plugs ) and the 2.5 liter from 1998 to 2001 also has 8 spark plugs


How do you replace spark plugs in a 1989 Cherokee?

How to replace spark plugs in a 1989 jeep cherokee?


What year 8 plug head on Ford Ranger?

The 2.3 liter in the Ford Ranger from 1989 to 1997 and the 2.5 liter from 1998 to 2001 use ( 8 ) spark plugs


How do you change spark plugs on a 1989 Plymouth Acclaim?

To change the spark plugs on a 1989 Plymouth Acclaim, first ensure the engine is cool, then disconnect the battery to avoid any electrical issues. Remove the spark plug wires carefully, noting their order for reinstallation. Use a spark plug socket to unscrew and remove the old spark plugs, then inspect and gap the new plugs according to specifications before installing them. Finally, reconnect the spark plug wires and the battery.


How many spark plugs are needed for a 1989 Ford Crown Victoria?

8 spark plugs


Where are the spark plugs located on a 1989 Bonneville?

Just follow the plug wires to the chambers and you'll find the spark plugs.


How do you change spark plugs on 1989 ford e350 van?

To change the spark plugs on a 1989 Ford E350 van, first ensure the engine is cool and disconnect the battery. Remove the ignition wires carefully, labeling them for reinstallation, and then use a spark plug socket and ratchet to unscrew and remove the old spark plugs. Before installing the new plugs, check and adjust the gap if necessary, then install them by hand to avoid cross-threading, and tighten them with the socket. Finally, reconnect the ignition wires in the correct order and reconnect the battery.


How do you change rear spark plugs in 1989 Oldsmobile delta 88?

Bust your knuckles with the use of a mirror to see the plugs and a magnet to pick them up when they drop under the engine block!


How many spark plugs does a 1989 50 hp force have?

two


How many spark plugs in a 1989 4-cylinder mustang?

Four


What Spark Plugs for a 1989 Mercury Outboard?

100 hp searay