If your talking about the one in your rear windshield then open your trunk and directly underneath the light you will see a twist off cap. Just twist it off and the light bulb will come right out.
Begin by removing the wiring harness from your third brake light. Remove the third brake light retaining screws. Reverse the process to install your new third brake light.
how to change third or center brake light on Chevy beretta 95
How to change third brake light in 2009 Hyundai sonata
They're LEDs. If some aren't working the entire assembly needs to be replaced.
From inside the trunk.
the third brake light is direct from brake light switch no fuse
carefully
To change the third brake light bulb in a 2001 Kia Sephia, first, open the trunk and locate the plastic cover where the third brake light is situated. Remove the cover by unscrewing any screws or unclipping it. Once exposed, twist the bulb socket counterclockwise to release it, then pull out the old bulb and replace it with a new one. Reinsert the bulb socket, secure the cover back in place, and your third brake light should be functioning properly.
I assume you only need to change the bulbs. Go into the trunk and look up. You should see the wires leading to the mounting point for the third brake light, you candisconnect the connectors and then change the bulbs this way.
I just replaced a blown third brake light bulb today. ... I have about 60k on my M and havent yet had to change the brake light---so if it only has to be done once in the ... If memory serves, the Concorde's is in the rear window. ... Well I decided to mod my 2004 300Mspecial Third Brake lights, not with a bulb ...
it would be the brake light switch about 20 dollars at autozone
Unlike the two standard brake light bulbs, which are generally changed from behind, a 'third' brake light is usually changed from the front. Locate the lens mounting screws and remove them; the bulb should then be revealed.