0
What else can I help you with?
What is the top speed of a dodge ram 3500 6.0L engine?
Dodge does not have a 6.0L engine.
Where is the engine speed sensor located on a 2000 dodge stratus?
where is the engine speed sensor located on a 1999 dodge stratus 2.4 l
Will engine timing affect idle speed?
Yes.
What is the timing adjustment on a 1977 360 Dodge power wagon?
The timing adjustment for a 1977 Dodge Power Wagon with a 360 engine typically involves setting the ignition timing to around 6 to 10 degrees before top dead center (BTDC) at idle speed. To adjust the timing, you can use a timing light while ensuring the engine is warmed up and running at idle. It's important to disconnect the vacuum advance line during this process for accurate readings. Always consult the vehicle's service manual for specific details and procedures related to your engine.
What is the speed of the 1998 dodge stratus?
depends on the engine
Where are the timing pulleys located in a motor engine?
the timing belt and pulleys driven the cameshaft at half carnk speed(engine speed) pulleys is connected to the crankshft front end of the engine. I donno weather this answer help or not :(
What would make a dodge caravan not start?
1) no spark 2) no or incorrect fuel or fuel/air ratio 3) insufficient cranking speed 4) low engine compression 5) incorrect timing If your caravan has distributorless ignition, check the crankshaft position sensor.
Which is the power of the engine and the maximum speed of the dodge challenger manual 1970?
100 hp is the power of the dodge challenger manual 1970 engine and its maximum speed is 96 mph.
How do you adjust timing in a 750 intruder?
To adjust the timing on a 750 Intruder, you need to first locate the timing marks on the engine's flywheel and the ignition timing cover. Use a timing light to check the current timing while the engine is running, and then loosen the ignition timing plate screws to rotate the plate for adjustment. Rotate it slightly counterclockwise to advance the timing or clockwise to retard it, then retighten the screws and recheck the timing. Always ensure the engine is at the correct idle speed and temperature for accurate adjustments.
2000 dodge ram truck chokes and dies when you take your foot off the accelorator. What could be wrong with the engine?
check the idle speed motor
Which is the power of the engine and the maximum speed of the dodge mirada 1979?
The power of the engine and the maximum speed of the 1979 Dodge Mirada are 90 bhp and 85 miles per hour respectively.
What is the timing degrees for 1977 dodge van?
The timing degrees for a 1977 Dodge van, particularly those with a 318 or 360 cubic inch engine, is typically set at 5 to 10 degrees before top dead center (BTDC) at idle. However, it’s essential to consult the specific vehicle's service manual or a timing specification chart for the exact setting, as variations may occur depending on the engine configuration and emissions equipment. Always ensure the engine is at operating temperature and that the idle speed is set correctly before adjusting the timing.
