0
To check the trouble codes on a 1989 Dodge Colt, you need to locate the diagnostic connector, which is typically found under the dashboard near the steering column. Use a jumper wire to connect terminals A and B on the connector. Turn the ignition key to the "On" position without starting the engine, and the check engine light will begin to flash, indicating the trouble codes. Count the flashes to interpret the codes as per the vehicle’s service manual.
What else can I help you with?
What are the trouble codes for a 1989 Dodge van?
There are hundreds, if not thousands of possible codes.
How do you check the codes on a 1989 Nissan 4-cylinder pickup?
Chiltons owner manual has complete eccm trouble codes
How do you get trouble codes for a 1989 Mazda mx6?
To retrieve trouble codes for a 1989 Mazda MX-6, you can use the diagnostic connector located under the dashboard. First, turn the ignition key to the "ON" position without starting the engine. Then, use a jumper wire to connect terminals E1 and TE1 on the diagnostic connector. The check engine light will blink in a series of codes that correspond to specific trouble codes; count the blinks to interpret the codes according to the vehicle’s service manual.
What are the production numbers and paint codes for the 1989 dodge ram?
tcpglobal.com for paint codes, production numbers
Is there a reset for ignition computer on a 1989 Dodge colt gt turbo dohc?
Yes, the ignition computer on a 1989 Dodge Colt GT Turbo can be reset by disconnecting the battery for about 15 minutes. This action clears any stored trouble codes and resets the computer's adaptive learning. Additionally, you can also check for a reset procedure in the vehicle's service manual, as some models may have specific steps for resetting the ignition system.
How do you check codes from the engine light in a 1989 Corvette?
== ==
What are the trouble codes for a 1989 Honda accord?
Go to Auto Zone's web site and type in Engine Trouble Code. They have a list for your vehicle and explains how to.
How do you read diagnostic troble codes 1989 Honda civic?
U check the codez
How do you Read codes on a 1989 Volvo 760 with 2.3 turbo?
To read codes on a 1989 Volvo 760 with a 2.3 turbo, locate the diagnostic connector under the dashboard near the driver's side. Use a jumper wire to connect terminals A and B on the connector. Turn the ignition key to the "on" position without starting the engine, and the check engine light will blink the trouble codes in a sequence. Count the blinks to identify the codes, referring to the vehicle's service manual for their meanings.
Does a 1989 dodge van have overdrive?
I have a 1989 Dodge B250...it has overdrive
What might be the trouble if your 1989 Jeep Cherokee won't start even though it cranks?
Check for fuel and spark
When was Trouble - Trouble album - created?
Trouble - Trouble album - was created in 1989.
