Obviously, buckling the seatbelt should silence the reminder. If you see/hear the reminder and all belts used by the reminder ARE buckled, the vehicle should be taken in for service ASAP. If you do not want to use your seatbelt for whatever reason, and wish to disable or silence the reminder system altogether, this can be done in a matter of minutes by a serviceperson at a dealership using a custom option setting device connected to the vehicle's internal computer. As this is a safety system, some dealerships may not be willing to do this unless you sign a liability waiver. However, if you do not wish to have the vehicle serviced professionally for whatever reason or would like to disable or bypass the seat belt reminder system for certain seats only, the following options may be of help: A piece of sheet metal of the same dimensions and shape as the actual seat belt 'plug' can be inserted into the seat belt 'socket' to silence the reminder. Obviously, the more the piece of metal resembles the actual 'plug', the more likely it is to work. Also, as seat belt buckle design has not changed much lately, a junkyard is one source of seat belt 'plugs' that can be cut from their straps and inserted in the seat belt 'socket' to silence the reminder chime. It's likely that several model years of a car (and even different makes/models) may all have similar seat belt 'plugs'. Lastly, there are wires running down the 'socket' end of the seatbelt which tell the car's computer if the seat belt is buckled or not. These wires may be cut, stripped and connected together (or separated, depending on which stops the reminder) permanently. It should be mentioned that disabling or bypassing this safety system in any way is discouraged by vehicle manufacturers, insurance companies, safety specialists and many other private and public organizations and individuals. However, there are conditions for which seatbelt use is extremely uncomfortable or presents more harm than benefit, such as in the case of certain abdominal/thoracic medical conditions, morbid obesity, etc.
plug the seatbelt in.. the warning stops then ;-)
how about just fastening the seatbelt when no one is using it.......
You can disable the seatbelt warning chime, in your Honda CRV, by removing the fuse. The fuse can be found in the fuse box in the engine compartment.
To disable the seatbelt chime on a Honda Pilot, start the vehicle and ensure the driver's seatbelt is unbuckled. Turn the ignition to the "ON" position without starting the engine, then buckle and unbuckle the seatbelt three times within 10 seconds. After that, turn the ignition off. When you start the vehicle again, the seatbelt chime should be disabled.
By wearing your seat belt.
Buckle your seat belt.
To disable the seatbelt chime on a 2011 Crown Victoria, you can follow these steps: Start the vehicle and buckle the driver’s seatbelt, then turn the ignition off. After that, unbuckle the seatbelt and turn the ignition back on without starting the engine. Buckle and unbuckle the seatbelt three times, ending with it unbuckled. Finally, turn the ignition off, and the chime should be disabled.
get an old seatbelt from a junk yard and plug in into the seatbelt soquit
To disable the seatbelt chime on a Ford Taurus, first, buckle the driver's seatbelt and turn the ignition on without starting the engine. Then, unbuckle the seatbelt and buckle it three times within a span of 10 seconds. After the third buckle, you should hear a chime indicating that the feature has been disabled. Turn off the ignition to save the setting.
simply wear your seatbelt.
Put on your seatbelt!
THIS DID NOT WORK ON MY 2007 CAMRY..ANY OTHER SUGGESTIONS??