replace window regulator assembly.
a fault. it's just broken.
nothing seems to be broken. the cable is not connected to the drive bracket
Check out this web site www.cflwindowregulators.comthey can help you.
Could be a broken cable under the drivers seat, unfortunently
how do you run the wire for the power windows on a 91 Mazda miata
No, you cannot usually fix or repair a power window cable. The ends of the cable are pressed on with a pressing machine. A person has to buy a whole new track and cable setup.
The cable has slipped off a guide or is broken. The regulator is toast. Replace it. Here's a post on how to do it.http://www.ricksfreeautorepairadvice.com/repair-topics/window-power-repair/replace-a-power-window-motor-regulator
1. remove door panels using screwdriver(s) and small crowbar 2. note where broken plastic pins shot out from 3. using triple jointed wrist (found on most Vietnamese) locate power cable in lower part of door 1A. Oops; not in order; disconnect battery FIRST 3B. Remove clip securing cable to window motor 4. Identify where power cable comes thru door to inside of car and add 2" 5. Cut cable at 2" point 6. Install new cable at window motor and splice togethter at 2" cut point 7. Pray for the best
Replace the power cable.
The 1998 VW Jetta drivers side power window relay switch can be found inside of the drivers side door. You will need to remove the drivers side door panel in order to access the power window relay switch.
check by drivers door in the bellows between the hinges almost 100%sure there will be broken wire(s)