To install a glove box cover on a 1969 Dodge Charger, first, ensure the glove box is empty. Align the cover with the hinges at the top and secure it in place using the provided screws or clips. Make sure the latch mechanism is functioning properly before closing the glove box. Finally, check to ensure that the cover opens and closes smoothly.
some of them had a glove box light inside the glove box.
Not that I've seen.
look under the dash underneath the glove box.
open the glove box and look inside to the left.
The glove box is integral into the dashboard - so the only way to take off the glove box is to remove the entire dashboard.
look under the dash by the glove box.
Open the glove box door and remove a cover on the left side to access.Open the glove box door and remove a cover on the left side to access.
Glove compartment, under a plastic cover.
If it's not in the glove compartment, check with the seller to see if they still have it. If not, check with your local dealership or check on a site like eBay.
To install the cabin filter on a 2005 Acura MDX, first, locate the glove compartment and empty its contents. Next, gently press in on the sides of the glove compartment to release it from its hinges and lower it down. Remove the cover panel behind the glove compartment by unclipping it, then slide out the old cabin filter. Insert the new filter, ensuring it is oriented correctly, reattach the cover, and lift the glove compartment back into place.
Cabin Air FilterIf it has one it will be behind the glove box .Open the glove box push in on the sides and the glove box will come out the bottom hinge will hold it on behind that. There will be a plastic cover with 4 plastic tabs push them in pull the cover off and there is your CAF.
To change the cabin air filter in a 2002 Toyota Avalon, first locate the filter compartment, which is typically behind the glove box. Open the glove box and remove any contents, then gently squeeze the sides of the glove box to release it from its hinges. Once the glove box is out, you can access the cabin air filter cover; remove the cover and pull out the old filter. Install the new filter in the same orientation, replace the cover, and reattach the glove box.