0
Remove drive belt. Put jack under oil pan. Remove front motor mount (18mm bolts). Lower jack under engine. Jack up car. Remove front right tire. Remove plastice shields. Rent harmonic balancer puller from auto parts store, free when you return it. Remove bolt for old balancer. Place pin into hole. Hold puller tool while you install three bolts (from puller set) into old balancer. Screw large center bolt into puller to push off the old balancer. Hopefully you have an impact, because it is tight and will take alot of effort. Install: Line up new balancer. Tap lightly with block of wood, just enough until center bolt threads can be started. Use impact to drive it all the way on. Put everything back in reverse order.
What else can I help you with?
How do you remove a harmonic balancer on a Chevy Malibu with 3.1?
Go to Autozone and tell them u need a harmonic balancer puller
Is the thread reversed on a Chevy Malibu 2001 harmonic balancer?
Yes, the bolt that holds the harmonic balancer in place on a 2001 Chevy Malibu is reverse thread. I learned that the hard way and stripped the head of my bolt down to nothing. And the bolt is almost impossible to find, because they no longer make them.
How do you install a harmonic balancer on a 1999 Chevy Silverado with a 5.3?
The engine has a harmonic balancer on it, but if it is off, it is easy to re-install. Simply line up the key and tap it on most of the way and torque down the center bolt.
What is the position location of a crankshaft Position sensor on a 2003 Chevy Malibu?
ONE IS ON THE BLOCK, FIREWALL SIDE. tHE OTHER IS BENEATH THE HARMONIC BALANCER ON THE FRONT.
What it the correct size harmonic balancer for a 1968 396 Chevy?
8 inch balancer.
How do you replace harmonic balancer on 2005 Chevy Colorado 3.5?
To replace the harmonic balancer on a 2005 Chevy Colorado 3.5, first disconnect the negative battery terminal and remove any components obstructing access, such as the serpentine belt and crankshaft pulley. Use a harmonic balancer puller to carefully remove the old balancer from the crankshaft. Install the new harmonic balancer by aligning it with the keyway on the crankshaft and pressing it into place, ensuring it's properly seated. Reassemble the components in the reverse order, reconnect the battery, and check for proper operation.
Can you use a harmonic balancer off a Chevy 350 on a Chevy 307?
Yes.
Is the harmonic balancer the same for an 85 and 86 Chevy 350?
yes.
Where is the crank sensor on a 95 Chevy Lumina?
Behind the harmonic balancer.
Will a Chevy 305 harmonic balancer work on a 350 motor?
yes
How do you remove a harmonic balancer on a 99 Chevy Monte Carlo?
take off the serpentine belt and crank pulley and you will need a harmonic balancer pulley to get it off.
How do you change the Harmonic Balancer on a 1977 Chevy 350?
they make a harmonic balancer install/ remover....very simple with the right tool... more than likely any local parts store should have one on the shelf...they come with a decent diagram to help ya out
