You can use any brand of remote start, but the key is that you will need a bypass module since this particular model has Passlock II (which is GM's anti-theft solution).
Most all the wires you need to get to are located in the ignition harness (with the possible exception of the tach wire).
yes
Directions come with the remote starter kit.
you should take it back to the dealer
where is the starter located on a 2004 chevy suburban
How do you replace a starter in a 1999 suburban
To install a remote starter on your Chevy Colorado, first, select a compatible remote starter kit designed for your vehicle. Begin by disconnecting the negative battery terminal to prevent any electrical issues. Follow the installation instructions provided with the kit, which typically involve connecting various wires to the ignition system, starter, and other components. Finally, reattach the battery terminal, test the remote starter functionality, and ensure everything is working correctly.
disconnect your battery, {neg. cable first} then pos. cable, go under your car/truck and unbolt starter. There you have it. To install work it backwards
BEHIND the starter. You MUST remove the starter to get to it.
On my 99 Suburban, the alarm activates when you press the lock button on the remote twice.
Try this site www.programyourremote.com
Do not install the shims. Your starter should work fine.
Begin by removing the positive cable from your 1993 Chevy Corsica battery. Remove the cables on the front of the starter. Remove the starter retaining bolts. Reverse the process to install your new starter.