Nothing
Wire diagram for 02sensor on 95 Chevrolet tahoe
firing order is: 1,8,4,3,6,5,7,2
One at a time
Remove the spark plug wires from your 1993 Chevy Astro spark plugs. Remove the spark plugs with a 5/8 deep well socket, by turning the socket to the left. Reverse the process to install the new spark plugs.
I believe ngk r the best....
The spark plug wires on your 1994 Chevrolet Caprice are quite easy to change. The spark plug wires simply lift off on each end. Put the new spark plug wires on and push until you feel a click.
To change the spark plugs on a 2004 Chevrolet Impala with a 3.4L motor, first ensure the engine is cool and disconnect the negative battery terminal. Remove the ignition coil by unbolting it and disconnecting the electrical connector. Then, carefully pull the spark plug wires off the spark plugs and use a spark plug socket to remove the old plugs. Install the new spark plugs with the correct torque, reattach the wires and ignition coil, and reconnect the battery terminal.
No the spark plug wires have to be in firing order
Every 100,000 - change wires also.
You will need to remove the spark plug wires on your Chevrolet 3.1 liter engine. Remove the spark plugs with a 5/8 deep well socket. Turn the socket to the left. The spark plugs will come out. Reverse the process to install the new spark plugs.
You can begin by removing the spark plug wires from your 1985 Chevrolet S 10 Blazer spark plugs. Use a 5/8 deep well socket to turn the spark plugs out. Turning the socket to the left will loosen the spark plugs. Reverse the process to install the new spark plugs.
you either did not gap the plugs to spec or you put this wires on wrong