answersLogoWhite

0

It depends on what kind of car and what engine you have.

You could temporarily install a mechanical oil pressure gauge in place of the factory unit to verify the engine oil pressure.

User Avatar

Wiki User

11y ago

What else can I help you with?

Related Questions

How do you reset the timing chain tensioner on a 2001 Pontiac grand AM?

1. For a 2.4 Quad you have a plunger that bolts on which gets it's pressure from the oil pump. The tensioner just needs to be reseated no bolts required it will set next to a piston type plunger and all you need to do is manualy turn the engine 2 to 3 turns and if the plunger is good the little piston should come out and put pressure on the tensioner and tighten the chain. If it does not come out assuming you have plenty of oil in your engine then you need to replace the tensioner which is around $40.00. Tensioner has a round hole in it and slides over a pin on the inside housing and if the plunger is working it will reload the tensioner. After engine restart you may hear the chain as if it is loose but the oil pressure will balance out the needed plunger pressure aganist the timing chain and will quiet down.


Where is the belt tensioner located for the timing belt on a Chevrolet cavalier 1994?

There is no Timing Belt. It has a Timing Chain ,, inside the Engine.


How do you loosen the timing chain on a 1995 Saturn SC1?

Once you have the front cover off the engine, examine the tensioner bar on the left side. The left tensioner operates on engine oil pressure to keep the timing chain tight, and a ratchet holds light pressure on the tensioner bar when the engine is turned off. You should be able to press the piston in by releasing the ratchet, then use a small piece of wire to hold the tensioner in place. Once the tensioner has been secured, just remove the bolts on the tensioners. I just noticed that you indicated that it's an SC1, meaning that there is only one camshaft but the instructions should be much the same


How to reset timing chain tensioner in 99 pontiac grand am?

To reset the timing chain tensioner on a 1999 Pontiac Grand Am, first, ensure the engine is cool and the battery is disconnected. Remove the timing chain cover to access the tensioner. Compress the tensioner using a suitable tool, then secure it in the compressed position with a pin or similar device. Reinstall the timing chain cover and reconnect the battery before starting the engine to check for proper operation.


How does the timing chain tensioner work on vauxhall corsa?

The timing chain tensioner on a Vauxhall Corsa maintains the proper tension in the timing chain, ensuring optimal performance and preventing slack that could lead to chain wear or failure. It typically operates hydraulically, using engine oil pressure to adjust the tension automatically based on the chain's movement and load. When the engine runs, the tensioner extends or retracts as needed to keep the chain tight, allowing for smooth operation of the camshaft and crankshaft synchronization. Regular maintenance of the oil system is crucial for the tensioner's effective operation.


Where is the tensioner on a 97 Ford Escort?

there are two tensioners, the serpentine tensioner and the timing belt tensioner. the timing belt tensioner is behind the timing belt cover ;)


Do the 2003 cavalier have a timing belt or chain?

The 2.2 ecotec motor has a timing chain with oil pressure tensioner and chain guides.


Where is the timing cha in located on a 1997 cavalier?

The timing chain is on the front of the engine. Your drive belt tensioner pulley is bolted into the timing chain housing.


Is the 2001 ford 4.0 liter sohc engine an interference engine?

not gospel but 4.0 sohc engine is an interference major damage if timing chain or timing chain tensioner breaks


How do you remove a timing chain tensioner on a 2000 dodge councor with a 3.5 engine?

with a pair of pliers


How do you change the timing belt tensioner on a Vauxhall Astra 1.4 1995?

1.4 Eight valve engine. The water pump is the timing belt tensioner on this model. you need to slacken the pump and rotate it to tension the belt.


How do you adjust the timing chain tension on a 1998 Saturn SL2?

you can't : On the '97 Twin cam engine the cam chain tensioner depends on oil pressure. I had a problem that with 200,000 miles the chain had stretched farther than the tensioner could handle and had to replace the cam chain.